Skip to content

Need stainless steel fittings, valves or hose?

Straight Quick-Screw Ball Valve — FerruleX stainless steel fittings

Straight Quick-Screw Ball Valve

Straight Quick-Screw Ball Valve: stainless steel ball valve with quick-screw tube ends. FerruleX factory RFQ. Stocked sizes ship fast. Fast stock shipping.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Ends
Quick-screw
Pattern
Straight
Pressure
Pneumatic class; 10–16 bar (145–230 psi) typical

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Air-panel plumbing is the case this valve was drawn for: a straight body, a quarter-turn handle and quick-screw nuts that take soft tube without a ferrule set. Sizes run Φ3 mm to Φ25 mm, or 1/8 to 1 in tube, with M10 to M24 port threads cut ZG(R), NPT, G or M. Bodies are 304, 316 or 316L stainless, copper on request. Working pressure is around 930 psi (6.4 MPa); the working ceiling is ambient, about 70 °C at most. Right-angle and three-way bodies and panel-mount versions come from the same range. Media is liquid or gas, most often air and water line in plant duty. Quote by tube OD, thread code and body pattern.

The socket decides the tube: quick-screw nuts close on soft tube, so hard stainless line belongs on a ferrule valve instead. Ports are cut ZG(R), NPT, G or M, matching the run they land on. Panel-mount bodies and right-angle or three-way patterns are quoted from the same drawing set, ambient service to about 70 °C.

Sizes
Φ3 mm to Φ25 mm, or 1/8 to 1 in tube OD.
Threads
Ports cut in ZG(R), NPT, G or M form.
Bodies
304, 316 or 316L stainless, with copper on request.
Temperature
Ambient service with a working ceiling around 70 °C.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
EndsQuick-screw
PatternStraight
PressurePneumatic class; 10–16 bar (145–230 psi) typical

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Is this a straight or an angle body, and when do I need the angle version?

This one is straight, so the tube run enters and leaves on one axis. The right-angle pattern is available from the same range when the line has to turn at the valve.

Which thread form do I order, and what happens if it does not match the port?

Ports are cut ZG(R), NPT, G or M, and the form is fixed at machining, so quote the thread code with the tube size. An NPT male thread will not seal into a G port.

930 psi is on the sheet. Is that enough for a high-pressure line?

No. This is a pneumatic utility body rated around 930 psi, and the quick-screw nut is the soft point, so a high-pressure branch needs a different valve class entirely.

What does the 70 °C ceiling rule out?

Hot process branches and steam tracing. Above that ceiling the soft tube and the seat degrade, so the valve stays on ambient air and water duty even at low line pressure.

Can I throttle flow with the handle part open?

Not reliably. A ball seat is made for quarter-turn isolation, and holding it part open washes the seat and gives a flow curve you cannot repeat. Fit a needle valve for throttling.

Does the body mount through a panel?

Yes. Panel-mount bodies come from the same drawing set, and the straight pattern keeps the tube run on one axis behind the panel, which is what air-panel plumbing usually needs.

Related products