Skip to content

Need stainless steel fittings, valves or hose?

Stainless Steel Check Valves & Inline Filters

6 products

One-way valves in compression, female thread and split-body styles, plus inline filters. Mark flow direction on the order.

How to order: These valves are direction-sensitive. Mark flow direction and cracking pressure on the RFQ so the factory sets the spring or disc correctly.

Open a card for material, ends and ordering. Price is on the quote.

Compression Check Valve — FerruleX stainless steel fittings

Compression Check Valve

Compression Check Valve: stainless steel check valve, double-ferrule ends, 2000 psi / 12 MPa. SS304/316. FerruleX factory RFQ. Stocked sizes ship fast.

View details →
Female Thread Check Valve — FerruleX stainless steel fittings

Stainless Steel Female Thread Check Valve — Types

Female Thread Check Valve: stainless steel check valve, NPT/G female ends, 2000 psi / 12 MPa. SS304/316. FerruleX RFQ. Stocked sizes ship fast.

View details →
Female Split-Body Check Valve — FerruleX stainless steel fittings

Female Split-Body Check Valve

Female Split-Body Check Valve: serviceable stainless steel check valve, female threads, 2000 psi / 12 MPa. SS304/316. FerruleX factory RFQ. Fast stock shipping.

View details →
Inline Filter — FerruleX stainless steel fittings

Stainless Steel Inline Filter for Instrument Lines

Inline Filter: stainless steel instrumentation filter, compression or NPT/G ends, 2000 psi / 12 MPa. SS304/316. FerruleX RFQ. Micron rating named on the RFQ.

View details →
Swing check valve with hinged disc for low pressure drop process lines — FerruleX stainless

Swing Check Valve

Swing Check Valve: hinged disc, low pressure drop for process lines. SS304/316 stainless. FerruleX factory RFQ — confirm line size and class.

View details →
Dual-plate check valve with spring-loaded half-discs in a wafer body — FerruleX stainless

Dual-Plate Check Valve

Dual-Plate Check Valve: two spring-loaded half-discs in a compact wafer body. SS304/316 stainless. FerruleX factory RFQ — confirm line size and class.

View details →

Choosing in this range

What cracking pressure do I need?

The pressure that opens the valve sets the minimum line pressure and the loss at low flow. Too high a crack and a low-flow line never opens it.

Does mounting orientation matter?

Most instrument patterns work in any orientation, but the flow arrow still governs. Vertical runs are where an installation gets fitted backwards.

Soft seat or metal seat?

Soft seats close tighter at low pressure; metal seats take heat and abrasive duty. The choice follows the medium and the reverse-leakage requirement.

Can a check valve isolate a line?

No. It holds reverse flow only and carries no operator, so isolation still needs a ball, needle or gate valve on the run.

Why does the valve chatter or slam?

Usually sizing: flow sits near the cracking point, or the valve is too large for the line. Start from flow and pressure drop, not from pipe size.