Skip to content

Need stainless steel fittings, valves or hose?

Inline Filter — FerruleX stainless steel fittings

Stainless Steel Inline Filter for Instrument Lines

Inline Filter: stainless steel instrumentation filter, compression or NPT/G ends, 2000 psi / 12 MPa. SS304/316. FerruleX RFQ. Micron rating named on the RFQ.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Ends
Compression / NPT / G
Size
OD 3–16 mm / 1/8"–1"
Pressure
2000 psi / 12 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

The placement rule for an inline filter is simple: put it upstream of whatever has the smallest passage in the line, and leave enough straight tube on the element side to take the element out without cutting. FerruleX housings come in SS304, SS316 and SS316L, with tube ends from 3 mm to 16 mm or 1/8 to 1 in, and threaded ends in ZG(R), NPT or G, male or female, plus M10 to M24. The filter series is rated around 2000 psig (12 MPa) at ambient working temperature. Filtration grade is not a catalog figure: mesh or micron is fixed with the order, so state it with the medium and the flow rate. An element that is too fine for the flow is a pressure drop you will chase later.

An inline filter is a maintenance item, not a throwaway part: the housing has to come apart in place, and the tube run has to leave room for that. Compare the line temperature with the series figure, which holds for ambient service. Name the medium and the filtration grade together.

Placement
Mount it upstream of the component with the narrowest passage.
Ends
Compression tube ends, plus ZG(R), NPT or G threads, male or female.
Size
Tube from 3 mm to 16 mm and 1/8 to 1 in, with M10 to M24 threads.
Pressure
The filter series is rated around 2000 psig, or 12 MPa.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
EndsCompression / NPT / G
SizeOD 3–16 mm / 1/8"–1"
Pressure2000 psi / 12 MPa

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

How is the filtration grade fixed on this filter?

Mesh or micron is not a catalog figure for the series: it is set with the order, because the element that guards the smallest passage downstream also has to pass the flow. Name the medium, the flow rate and the grade together.

What pressure drop does the element add to the line?

An element fine enough to protect the narrowest passage still has to pass the flow on the head available, so an over-fine grade shows up as a permanent drop across the housing rather than as filtration.

Can the element be cleaned and refitted?

The housing comes apart in place and the element lifts out, so a mesh screen can be cleaned and refitted. Isolate and vent the line first, and replace a finer element that has taken on fines rather than washing it.

Does the housing care about mounting orientation?

It works in any attitude, but the element has to leave the body, so leave a straight length of tube on that side and keep the wrench flat reachable. Mounting the element side low lets debris collect where it can be drained and seen.

Is the flow direction marked on the body?

The body carries a flow arrow and it must be followed: flow enters on the element side, leaving debris on the upstream face instead of pushing it into the downstream line.

Does the 2000 psig rating apply at elevated temperature?

Treat 2000 psig, or 12 MPa, as an ambient working temperature figure. A line running hotter than ambient needs the case reviewed rather than the number carried over, so state the service temperature with the enquiry.

Related products