Skip to content

Need stainless steel fittings, valves or hose?

3-Way Compression Ball Valve — FerruleX stainless steel fittings

3-Way Compression Ball Valve

3-Way Compression Ball Valve: diverting stainless steel ball valve with double-ferrule ports. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS316 / SS316L / SS304
Ends
Compression (double ferrule), three ports
Porting
L-port or T-port, stated on the RFQ
Pressure
930 psi / 6.4 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Three ports on the body do not tell you the flow path; the ball inside does. A three-way valve either diverts flow between two outlets or mixes two inlet streams, and which one you get depends on the port arrangement machined into the ball. An L-port diverts, connecting the common port to one of two adjacent ports. A T-port can mix or distribute, joining all three ports or selected pairs depending on handle position. The body designation "three-way" does not say which, so put the porting diagram on the RFQ rather than inferring it. The rating and the ferrule ends are shared with the rest of the group: 930 psi (6.4 MPa), ambient service with a working ceiling around 70 °C, panel mounting available.

Three-port 930 psi (6.4 MPa) stainless ball valve with ferrule compression ends. Diverting or mixing depends on the ball: an L-port diverts flow between outlets, a T-port can mix two streams. State L-port or T-port on the RFQ, because three-way alone does not define the path. Ambient service, working ceiling around 70 °C, panel mounting available.

Ports
L-port diverts between outlets; a T-port can mix two streams.
RFQ
State L-port or T-port; three-way alone does not define the path.
Mounting
Panel mounting is available on the three-port body.
Group
Same 930 psi (6.4 MPa) rating and ferrule ends as the group.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS316 / SS316L / SS304
EndsCompression, three ports
Tube OD3–25 mm / 1/8"–1"
PortingL-port (divert) or T-port (mix), on RFQ
Pressure930 psi / 6.4 MPa at ambient
TemperatureAmbient; working ceiling around 70 °C

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

What is the difference between an L-port and a T-port?

An L-port diverts flow, connecting the common port to one of two adjacent ports. A T-port can mix or distribute, joining all three ports or selected pairs depending on handle position.

Can all three ports be shut off at once?

Not from the porting alone. An L-port cannot close the common port off from both branches at once, and a T-port closes all three only when its seat arrangement allows, so state the requirement on the RFQ.

What pressure is this valve rated for?

It is rated 930 psi (6.4 MPa) at ambient, the same as the rest of the group. Do not read it as a high-pressure valve when sizing the line.

What does the 70 °C ceiling rule out?

It rules out steam service and any hot process line, because the seats are the limit rather than the body. Keep the working temperature under that ceiling and check the media on the RFQ.

Can this valve be used to throttle flow?

A ball valve is an on-off device: holding it part open erodes the seat edge and gives poor control. Run it fully open or fully closed and use a separate control valve for regulation.

Can I turn the body after the ferrules are made up?

No, the joint is set once the nut pulls the ferrules onto the tube. Orient the ports before final tightening so the handle sweep and the branch runs suit the installation.

Related products