
Angle Female Needle Valve
Angle Female Needle Valve: 90° stainless steel needle valve with female threads. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
- Brand
- FerruleX
- Material
- SS304 / SS316 / SS316L
- Ends
- Female thread both ports
- Pattern
- Angle, 90°
- Pressure
- 2000 psi / 14 MPa
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
On an angle female needle valve the outlet turns 90° in the body, so a gauge or a short threaded stub lands square to the tap instead of hanging off an elbow. Two female ports mean no ferrule to make up, which puts the thread standard at the centre of the specification: ZG(R), NPT, G and M are different forms and each port has to be named. The needle is a metering element, not a fast isolator — it trims flow and closes positively at instrument scale, slowly. Bodies in 304, 316 or 316L, ports M10 to M24, rated 2000 psi / 14 MPa, with 3 mm to 16 mm and 1/8 to 1/2 in tube where an end is ferrule. Panel mounting available.
Two female ports and a 90° outlet: the gauge faces square to the tap with no elbow behind it. Name the thread standard per port — ZG(R), NPT, G or M — because the size alone does not define the form. 2000 psi / 14 MPa, ports M10–M24, panel mounting available.
- Turning
- Outlet leaves the body at 90°, so the gauge needs no elbow.
- Ports
- Female thread both ends; the standard is named per port.
- Duty
- Metering element — it trims flow slowly rather than switching it.
- Rating
- 2000 psi / 14 MPa with M10–M24 ports.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 / SS316L |
| Ends | Female thread, both ports |
| Threads | ZG(R) / NPT / G / Metric, M10–M24 |
| Pattern | Angle, 90° |
| Pressure | 2000 psi / 14 MPa |
| Mounting | Panel mount available |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Is the needle meant for shut-off or for metering?
Metering first. The needle trims flow in fine increments and closes positively at instrument scale, but it is slow to operate. Where the line is isolated often, fit a ball valve upstream and leave the needle for trimming.
Why choose the angle pattern over a straight valve with an elbow?
The outlet leaves the body at 90°, so a gauge or short stub lands square to the tap with no elbow behind it. That removes a threaded joint and the depth an elbow needs where the take-off sits close to a wall.
What do I need to know about the packing and stem adjustment?
The stem runs through a packed gland, and the gland nut is there to be re-tightened as the packing settles with use. Adjust it gently: over-tightening loads the stem and makes the fine metering movement stiff.
How fine is the metering compared with a ball valve?
Flow rises slowly along the needle taper, so a small stem movement changes flow by a small amount; the valve is built for that resolution rather than for capacity. A ball valve gives full flow, not fine trim.
Can this valve be panel mounted?
Yes, panel mounting is available and is normally how an angle body is held where a gauge hangs off it. State it on the RFQ so the body is machined for the panel rather than supplied as a line valve.
How do I avoid wire drawing the seat?
Open and close slowly on a high differential and avoid holding the needle just off the seat, where the whole pressure drop lands on a narrow gap. Crack it open, set the flow, then leave it there.
Related products

High-Pressure Female Globe Valve — Types & Sizes
High-Pressure Female Globe Valve: HP stainless throttling valve, female thread. SS316 preferred. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →
Instrument Bleed Valve
Instrument Bleed Valve: vents trapped pressure between closed blocks and flags seat leakage. SS304/316 stainless. FerruleX factory RFQ.
View details →
Stainless Steel Gauge Root Valve, NPT & BSP Threads
Gauge Root Valve: primary isolation at the gauge take-off, single or multi-port. SS304/316 stainless. FerruleX factory RFQ.
View details →
Straight Compression Needle Valve
Straight Compression Needle Valve: stainless steel needle valve, double-ferrule, fine metering. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →