
Straight Compression Needle Valve
Straight Compression Needle Valve: stainless steel needle valve, double-ferrule, fine metering. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
- Brand
- FerruleX
- Material
- SS304 / SS316 / SS316L
- Ends
- Compression 3–16 mm / 1/8"–1/2"
- Pattern
- Straight (angle also available)
- Pressure
- 2000 psi / 14 MPa
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
Straight compression stainless steel needle valves meter sampling, purge and gauge-isolation flows with a fine stem. FerruleX SS304/SS316/SS316L valves take double-ferrule ends so instrument tubing connects without threaded adapters, across 3–16 mm and 1/8"–1/2" tube with M10–M24 metric ends. The catalog rating is 2000 psi (14 MPa) at ambient temperature — roughly double the ball valve in the same catalog, which is why the needle valve is the part that goes on the metering line and the ball valve on the isolation line. It is a throttling valve, not a substitute for frequent on/off duty: open slowly against a high differential or the stem wire-draws the seat. Straight bodies keep the panel layout linear and the body can be panel-mounted. Tube OD and packing preference belong on the RFQ.
Needle valves are for control, not as a substitute for a ball valve on frequent on/off duty. Open slowly on high differential pressure to avoid stem wear and seat wire-drawing. At 2000 psi / 14 MPa the compression needle valve carries roughly twice the pressure of the catalog ball valve, so the pair is usually needle on the metering leg and ball valve on isolation. FerruleX can soft-tip stems when the RFQ notes delicate gases or vacuum service. Fine needle stem for metering. Double-ferrule compression.
- Control
- Fine needle stem for metering; open slowly on high ΔP.
- Pressure
- 2000 psi / 14 MPa at ambient temperature.
- Tube OD
- 3–16 mm / 1/8"–1/2"; M10–M24 ends.
- Mounting
- Straight body, panel mount available.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 / SS316L |
| Ends | Compression, weld, threaded, reducing |
| Tube OD | 3–16 mm / 1/8"–1/2" |
| Pattern | Straight; angle available |
| Pressure | 2000 psi / 14 MPa at ambient |
| Mounting | Panel mount available |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Is this valve a shut-off valve or a metering valve?
It is a metering valve. The fine stem throttles flow, but the seat is not built for frequent full open and full close duty, so keep a ball valve on the isolation leg and use this one for control.
When should I choose straight over angle?
Straight keeps both tube ends on one centreline, which suits a run through a panel or along a manifold. Angle turns the flow at the body and removes a bend where the line has to corner.
How do I open it against high differential pressure?
Crack the stem slowly and let pressure equalise across the seat before turning further. Slamming it open on a high differential is what damages the stem tip and the seat, so treat the first turns as the critical ones.
What causes seat wire drawing?
Wire drawing is erosion of the seat by flow at a partly open gap. It comes from throttling a high differential at a very small opening for long periods, and from dirt trapped at the seat. Open further or filter upstream.
Can the straight body be panel mounted?
Yes. Panel mounting is available on the straight body, which keeps the valve fixed at the panel face and the tube runs linear on both sides. State the panel thickness and the tube OD on the RFQ so the mounting hardware matches.
Can it serve as a gauge root valve or a bleed valve?
It can isolate and throttle a gauge line, and the fine stem gives better control than a ball valve there. For pure bleed duty a dedicated bleed valve vents more cleanly, so tell us the service before ordering.
Related products

Angle Compression Needle Valve — Sizes & Specs
Angle Compression Needle Valve: 90° stainless steel needle valve with double ferrules. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Forged Compression Needle Valve — Sizes & Specs
Forged Compression Needle Valve: forged-body stainless steel needle valve for vibration. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Stainless Steel Weld-End Needle Valve — Sizes
Weld-End Needle Valve: stainless steel needle valve with weld prep for permanent metering. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Stainless Steel Straight Female Needle Valve — Types
Straight Female Needle Valve: stainless steel needle valve with female threads for manifolds. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →