Skip to content

Need stainless steel fittings, valves or hose?

Straight Female Needle Valve — FerruleX stainless steel fittings

Stainless Steel Straight Female Needle Valve — Types

Straight Female Needle Valve: stainless steel needle valve with female threads for manifolds. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Ends
Female thread both ports
Threads
ZG(R) / NPT / G / Metric, M10–M24
Pressure
2000 psi / 14 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A female-ended needle valve drops into a manifold, a header or a gauge socket without a ferrule on either side: two threaded ports, one body, no tube joint to make up. That makes the thread standard the whole specification. ZG(R), NPT, G and M are four different definitions and none of them is interchangeable, so each port has to be named rather than assumed from the size. Bodies are 304, 316 or 316L, ports M10 to M24, rating 2000 psi / 14 MPa, and where one end is ferrule the tube range is 3 mm to 16 mm and 1/8 to 1/2 in. Straight and angle patterns are both offered, with panel mounting available.

Two female ports mean no ferrule on either side and the thread standard becomes the specification. Name ZG(R), NPT, G or M per port instead of quoting a size alone. Bodies in 304, 316 or 316L, ports M10–M24, 2000 psi / 14 MPa, straight or angle, panel mounting available.

Ports
Female thread both ends; no ferrule to make up on either side.
Threads
ZG(R), NPT, G or M, named per port rather than by size alone.
Rating
2000 psi / 14 MPa with M10–M24 ports.
Pattern
Straight body; angle pattern available in the same family.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
EndsFemale thread, both ports
ThreadsZG(R) / NPT / G / Metric, M10–M24
Tube side3–16 mm / 1/8"–1/2" where an end is ferrule
Pressure2000 psi / 14 MPa
PatternStraight; angle also available

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Is this a metering valve or a shut-off valve?

This body is a metering trim, not a shut-off valve. The tapered needle gives fine control over a small opening; for positive bubble-tight isolation, fit a separate isolation valve ahead of it.

Straight pattern or angle pattern for my line?

Straight pattern runs the flow down the body axis in line with both ports. The angle pattern turns the outlet at a right angle so the body clears a wall or a header. Both are offered in the same family.

Can this valve be panel mounted?

Panel mounting is available, so a straight body can pass through a bracket or a panel face and be clamped at the fixing nut. State the panel thickness on the RFQ so the bonnet thread length is right.

How should it be opened against a high differential?

Crack the needle slowly and let the pressure equalise across the seat before opening further. Wiredrawing of the seat happens when the valve is throttled at a high differential, so open progressively instead of snapping the stem.

What damages the needle tip?

A hardened needle tip is easily marked by over-tightening. Close the valve until it seats and stop there, because forcing the stem past contact flattens the taper and the fine adjustment is lost.

How is the packing adjusted when the stem weeps?

The gland nut is the usual service point: it compresses the packing around the stem and can be adjusted in place. If the stem will not hold its position in fine metering, renew the packing before blaming the seat.

Related products