Skip to content

Need stainless steel fittings, valves or hose?

Male-Female Straight Needle Valve — FerruleX stainless steel fittings

Male-Female Straight Needle Valve, 316L, NPT

Male-Female Straight Needle Valve: stainless steel needle valve bridging dissimilar threads. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Ends
One male, one female thread
Threads
ZG(R) / NPT / G / Metric, M10–M24
Pressure
2000 psi / 14 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

One male end and one female end sounds like a small detail until the header port and the incoming gauge disagree: then the line needs an adapter, and an adapter brings a second joint and a second thread standard. This body removes that step. The male end screws into the header or the gauge socket, the female end receives the incoming thread, and the valve sits between them as one piece. Bodies are 304, 316 or 316L, ports M10 to M24, rated 2000 psi / 14 MPa, with 3 mm to 16 mm and 1/8 to 1/2 in tube where an end is ferrule. Two threads to specify on the RFQ, not one.

Replaces the adapter between a male port and a female line: one body, one joint fewer, and two thread standards that both have to be named. 2000 psi / 14 MPa, ports M10–M24, 304, 316 or 316L. Orientation is set by the male thread as it seats, so plan the facing before the final turn.

Adapter
One body where the line would otherwise need a male-to-female adapter.
Threads
Two standards to name on the RFQ: male end and female end.
Orientation
The male thread fixes the facing as it seats; check it before final make-up.
Rating
2000 psi / 14 MPa, 3–16 mm and 1/8"–1/2" tube where ferrule-ended.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
EndsMale thread one end, female thread the other
ThreadsZG(R) / NPT / G / Metric, M10–M24
Tube side3–16 mm / 1/8"–1/2" where an end is ferrule
Pressure2000 psi / 14 MPa
PatternStraight

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Is this a metering valve or a shut-off valve?

Both, but not equally. The needle taper gives repeatable throttling through small stem turns, while firm seat contact at the end isolates the line. Use full closure for isolation and reserve the taper for metering.

Why choose the straight pattern here?

With one male and one female end in line, the straight body drops into an existing run without an elbow, so the line keeps its direction and loses one joint instead of gaining two.

How is the stem packed, and can it be adjusted?

A gland nut compresses the packing around the stem; nipping it up slightly stops a weep at the gland without disturbing the body. Replace the packing rather than over-tightening once the nut bottoms.

Is this the same as a gauge root valve or a bleed valve?

No. A root valve isolates an instrument and a bleed valve vents trapped fluid; this body throttles flow, so specify it when the duty is control rather than simple isolation or venting.

Should I crack it open slowly on a high differential?

Yes. Opening against a large pressure drop puts the load on a small seat area, so bring the stem up in small increments and let the downstream side stabilise before you set the working position.

What wears the stem tip and seat?

Wire drawing. Throttling a gritty fluid across a nearly closed seat erodes the tip and cuts a groove in the seat, so strain the line upstream and open the valve past the erosion zone when the duty allows.

Related products