
Forged Compression Needle Valve — Sizes & Specs
Forged Compression Needle Valve: forged-body stainless steel needle valve for vibration. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
- Brand
- FerruleX
- Material
- SS304 / SS316 / SS316L
- Body
- Forged
- Ends
- Compression (double ferrule)
- Pressure
- 2000 psi / 14 MPa
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
A forged body begins as a billet pressed to a near-net blank, so the wall grain follows the bore instead of being cut across it the way bar stock is when a body is machined from solid. That is the whole argument: a continuous pressure wall with less machining through it. It does not change the seat, the stem or the packing, and it does not stiffen the tube hanging off the ferrule. Sizes run 3 mm to 16 mm tube and 1/8 to 1/2 in, threads M10 to M24 in ZG(R), NPT, G or M form, rated 2000 psi / 14 MPa. Straight and angle patterns, panel mounting available, in 304, 316 or 316L.
Forging buys wall soundness at the body, not a stronger joint: the ferrule and the tube still carry the vibration duty, so support the run regardless of body. Pick straight or angle by where the handle has to sit, and match the packing to process temperature.
- Body
- Pressed to a near-net blank, so the wall grain runs around the bore.
- Ends
- Double-ferrule compression, with weld, thread and reducing ends in the same family.
- Pressure
- 2000 psi / 14 MPa working rating, held across the size range.
- Patterns
- Straight and angle bodies, panel mounting available.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 / SS316L |
| Body | Forged |
| Tube OD | 3–16 mm / 1/8"–1/2" |
| Threads | M10–M24; ZG(R) / NPT / G / Metric |
| Pressure | 2000 psi / 14 MPa |
| Patterns | Straight or angle, panel mount available |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Is this valve intended for metering or for shut-off?
Metering first. The tapered stem changes flow gradually across the travel, so it suits throttling and fine adjustment. Treat it as a regulating valve rather than a guaranteed isolation valve, and fit a dedicated shut-off valve in series where isolation is required.
Straight or angle pattern, and can it be panel mounted?
Choose by where the handle has to sit, not by flow. Straight bodies keep the line in one axis; angle bodies turn the run at the body and free space at the panel. Both patterns are listed with panel mounting available.
How does the Cv figure relate to metering resolution?
Resolution follows the stem taper and the seat orifice, not the Cv number alone. A small Cv gives finer control but a narrower usable band, so state the flow range you must hold and the valve is trimmed to sit inside it.
Should the valve be opened slowly against a high differential?
Open and close it in small increments rather than snapping the handle across. A high differential across a partly open seat puts the full drop on a narrow gap, which is where erosion starts. Bring the line up to pressure slowly on first commissioning.
What damages the stem tip, and how is it avoided?
The tip is the first part to suffer. Over-tightening on closure hammers the taper into the seat, and grit carried through the bore scores it. Close firmly and no further, keep the line clean, and replace the stem rather than lapping a damaged tip.
What causes seat wire drawing and how is it prevented?
Wire drawing is leakage through a nearly closed seat at high differential, and it cuts a channel that no later adjustment can close. Throttle away from the seat, shut off fully rather than cracking the valve open, and keep the bore clear of debris.
Related products

Stainless Steel Weld-End Needle Valve — Sizes
Weld-End Needle Valve: stainless steel needle valve with weld prep for permanent metering. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Stainless Steel Straight Female Needle Valve — Types
Straight Female Needle Valve: stainless steel needle valve with female threads for manifolds. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Male-Female Straight Needle Valve, 316L, NPT
Male-Female Straight Needle Valve: stainless steel needle valve bridging dissimilar threads. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Angle Female Needle Valve
Angle Female Needle Valve: 90° stainless steel needle valve with female threads. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →