
Angle Compression Needle Valve — Sizes & Specs
Angle Compression Needle Valve: 90° stainless steel needle valve with double ferrules. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
- Brand
- FerruleX
- Material
- SS304 / SS316 / SS316L
- Ends
- Compression (double ferrule)
- Pattern
- Angle, 90°
- Pressure
- 2000 psi / 14 MPa
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
An angle compression needle valve exists to delete a joint. On a 90° body the branch turns at right angles to the through run, so a gauge lands directly on the leg instead of hanging off a separate elbow and nipple. Bodies are 304, 316 or 316L stainless. Double-ferrule compression ends take tube from 3 mm to 16 mm and 1/8 to 1/2 in; threaded ends run M10 to M24 in ZG(R), NPT, G or M form. Working pressure is 2000 psi / 14 MPa, the same as the straight pattern. Weld, thread and reducing ends are offered on the same body, and panel mounting lets the body sit through a plate so the gauge leg needs no bracket.
The saving is depth, not parts: a straight valve plus elbow stands further off the panel than one angle body. Confirm which leg carries the ferrule and which carries the gauge, since they are not interchangeable on every series. Panel mounting needs plate thickness to match the nut. Give tube OD, thread form and mounting on the RFQ.
- Pattern
- Angle body turns the branch 90° from the through run.
- Ends
- Double-ferrule compression 3–16 mm and 1/8–1/2 in, with weld, thread and reducing alternatives.
- Pressure
- 2000 psi / 14 MPa, the same figure as the straight pattern.
- Mounting
- Panel-mount option takes the body through a plate; the gauge leg needs no bracket.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 / SS316L |
| Ends | Compression, weld, thread, reducing |
| Tube OD | 3–16 mm / 1/8"–1/2" |
| Threads | M10–M24; ZG(R) / NPT / G / Metric |
| Pattern | Angle, 90° |
| Pressure | 2000 psi / 14 MPa |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Is this a metering valve or a shut-off valve?
Both duties are served by the same tapered stem, but the angle body is usually specified for throttling. Use it where flow is set and left, and for shut-off only where the seat is cycled occasionally rather than daily.
Straight or angle body, and how do I choose?
Choose angle when the outlet has to leave at 90° to the inlet: it removes one elbow and the joint depth that elbow adds. Choose straight where the run passes in line and stand-off depth is not the constraint.
Should the bonnet be integral or union type?
Integral bonnets hold a single pressure boundary and suit a valve that is set once; union bonnets let the bonnet assembly be replaced without cutting the tube, at the cost of one more joint to re-make.
How is the packing adjusted, and how often?
A gland nut compresses the packing; tighten it in small increments until the stem turns firmly without drag, then stop. Re-adjust when weeping appears at the stem, not on a fixed schedule.
Can the angle body be panel-mounted?
Yes. The body passes through the plate and a nut clamps it, so the gauge leg is carried by the panel rather than by the tubing. Check stem and knob clearance on the gauge side before drilling.
What causes seat wire drawing, and how is it avoided?
Wire drawing is erosion from a high velocity jet past a seat held only slightly open. Open the valve progressively and avoid leaving it cracked for long periods on the 2000 psi / 14 MPa line.
Related products

Forged Compression Needle Valve — Sizes & Specs
Forged Compression Needle Valve: forged-body stainless steel needle valve for vibration. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Stainless Steel Weld-End Needle Valve — Sizes
Weld-End Needle Valve: stainless steel needle valve with weld prep for permanent metering. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Stainless Steel Straight Female Needle Valve — Types
Straight Female Needle Valve: stainless steel needle valve with female threads for manifolds. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Male-Female Straight Needle Valve, 316L, NPT
Male-Female Straight Needle Valve: stainless steel needle valve bridging dissimilar threads. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →