Skip to content

Need stainless steel fittings, valves or hose?

Stainless Steel BA Tube — FerruleX stainless steel fittings

Stainless Steel BA Tube

Stainless Steel BA Tube: bright annealed instrumentation tube for compression fittings. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Type
BA tube
Finish
Bright annealed
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Two finish numbers come before anything else on this tube: the BA band at Ra below 0.4 to 0.8 µm, and the finer EP band at Ra below 0.1 to 0.25 µm. FerruleX lists the BA grade in 304, 316 or 316L, supplied annealed and soft so a run can be bent to its route without a setup that work-hardens it. Outside diameter runs 1/4 to 1 in, 6.35 to 25.4 mm, with a metric Φ6 to Φ25 series under that. The catalogue gives two joins, welded tube and compression fitting, and clean packaging for food or pharma lines. Working pressure sits at about 4500 psi for the group. Roughness band, grade, OD and join type go on the RFQ.

Soft annealed tube forms to the radius a run needs, so it can be routed after the panel is fixed instead of ordered pre-bent. Square and deburr each cut before the ferrule goes on, because a burr rolls the back ferrule off its seat. Clean packaging is offered for food and pharma lines.

Roughness
BA band at Ra below 0.4 to 0.8 µm, with the EP band below 0.1 to 0.25 µm.
Range
Outside diameter 1/4 to 1 in, or 6.35 to 25.4 mm, plus a metric Φ6 to Φ25 series.
Joins
Welded tube or compression fitting, the two connections the catalogue lists.
Pressure
Working pressure quoted at about 4500 psi for this group.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
TypeBA tube
FinishBright annealed
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

What surface finish does a BA tube actually carry?

Bright annealing gives the BA band, Ra below 0.4 to 0.8 µm, with no mechanical polishing step afterwards. The EP band, Ra below 0.1 to 0.25 µm, is the tighter option listed on the same material range.

How is BA different from a polished finish?

BA is produced in the annealed state under a controlled atmosphere, so the surface is clean without abrasive contact. A polished finish is cut mechanically after forming, which leaves a different surface and directional marks along the tube.

Does the tube hardness suit a compression fitting?

It is supplied annealed and soft, which is what allows the ferrule to bite and seat without cracking the wall. A tube already work-hardened by tight bending may resist that bite, so keep the bend radius generous.

Can the tube be bent on site instead of ordered pre-bent?

Yes. The annealed soft condition is listed as bendable, so a run can be formed to the route as built. State the bend radius on the RFQ, because the radius is what the wall has to survive.

Is the tube supplied in coils or in straight lengths?

Both are quoted to order. Give the coil length and the coil diameter you can handle on site, or the straight length, so the tube is wound, cut and packed to suit the run rather than a default.

How are the ends protected and how clean is the bore?

Clean packaging is offered for food and pharma lines, and the ends are protected so the bore arrives free of swarf. State the cleanliness level the line needs on the RFQ, since it is quoted with the order.

Related products