Skip to content

Need stainless steel fittings, valves or hose?

Tube Clamp — FerruleX stainless steel fittings

Tube Clamp

Tube Clamp: stainless clamp supporting instrumentation tubing against vibration. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Tube clamp
Fit
Instrument tube OD
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A clamp holds the tube, not the joint, so its job is to take vibration out of the run before it reaches a ferrule. Bodies come in engineering plastic, nylon or aluminium alloy; the size range covers 6 mm to 102 mm, single or double, light or heavy duty, U-type where the tube has to drop in from above. Fixing is rail, panel or welding, which is the decision that matters more than the clamp itself, because a welded stud cannot be moved when the layout changes. Spacing is a design call, not a catalogue value: set it from tube OD, mass and the vibration source. Put the first clamp close to any change of direction and to heavy valves. The clamp is a mechanical holder and carries no pressure class of its own.

Rail, panel and welded fixing are the options, and only rail lets a line be re-spaced without cutting anything. Double clamps hold two parallel tubes at one centre distance. Nylon bodies suit painted or thin-wall tube, where a metal jaw would fret the surface. Sizes run 6 mm to 102 mm.

Fixing
Rail, panel or welded stud, chosen per run.
Size range
Bodies cover 6 mm to 102 mm tube.
Bodies
Engineering plastic, nylon or aluminium alloy.
Patterns
Single or double, light or heavy duty, U-type.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeTube clamp
FitInstrument tube OD
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Does the clamp size follow the tube OD or the pipe size?

It follows the tube OD, not a nominal line size. The catalogue body range runs from 6 mm to 102 mm, so quote the measured OD on the RFQ and the jaw is selected against it.

Which fixing should be specified for a new line?

Choose by how the line is expected to change. Rail lets the body slide and be re-spaced later, a panel fixing suits a clamp through a plate, and a welded stud is permanent.

How far apart should tube clamps be set?

There is no catalogue spacing value. Set it from tube OD, the mass carried and the vibration source, then place the first clamp close to any change of direction and to heavy valves.

Why does the clamp carry no pressure rating?

It grips the tube from the outside and touches nothing pressurised. The pressure class belongs to the tube and the joints at each end, while the clamp carries mass and vibration only.

When is a double clamp better than two single clamps?

A double clamp holds two parallel tubes at one fixed centre distance and needs one fixing point instead of two. Single clamps suit runs where the tubes diverge or need separate spacing.

Should the jaw be nylon or metal on thin-wall tube?

Nylon is the safer choice for painted or thin-wall tube, where a metal jaw would fret the surface under vibration. The aluminium alloy body suits heavier runs and higher clamping loads.

Related products