
Stainless Steel Coil Tube
Stainless Steel Coil Tube: continuous stainless coil for long instrument runs. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
- Brand
- FerruleX
- Material
- SS304 / SS316 / SS316L
- Type
- Coil tube
- Form
- Coiled length
- Order mode
- Factory RFQ
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
Coil is supplied bright annealed in the soft state, so a length can be bent to follow a rack instead of being cut and coupled at every turn. One coil reaches across several cabinets, which removes joints that would otherwise need testing. OD covers 1/8 in to 1 in, stated as 3.175 mm to 25.4 mm, with 3 mm to 25 mm metric sizes in the same list. Alloy is 304, 316 or 316L. Working pressure is about 1200 psi. Ends join by welding or by ferrule fitting, which means the cut has to be square and burr-free before the nut is pulled up. Give OD, coil length and alloy on the RFQ.
Coil arrives wound, and a bend will open again if the tube is forced rather than guided. Use a bender matched to the OD and support the run between ties. Cut from the coil end, not the middle, so the remaining length stays usable. Welded and ferrule ends are both quoted.
- Anneal
- Bright annealed in the soft state so the coil can be bent to shape.
- Size range
- OD covers 1/8 in to 1 in, stated as 3.175 mm to 25.4 mm, with 3 mm to 25 mm metric sizes listed.
- Ends
- Welded joints or ferrule fittings are both listed for this coil.
- Pressure
- Working pressure is about 1200 psi.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 / SS316L |
| Type | Coil tube |
| Form | Coiled length |
| Order mode | Factory RFQ |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Is the coil bright annealed or polished?
The coil is supplied bright annealed in the soft state, not polished. That finish is what lets a length be bent to follow a rack without cracking, and it is the condition the ferrule end is made up on.
Does the soft anneal suit a ferrule fitting?
Yes. Both welded and ferrule ends are listed for this coil, and the soft annealed wall is what the ferrule is pulled up against. The cut must still be square and burr-free before the nut is made up.
What bend radius can the coil be taken to?
Use a bender matched to the OD and guide the bend rather than forcing it, or the coil will spring open again. Support the run between ties so the bend holds its shape.
How long is one coil and what diameter is it wound to?
Coil length and wound diameter are set per order, so both go on the RFQ with the OD and alloy. One coil is intended to reach across several cabinets, which removes joints that would otherwise need testing.
Is the coil ordered by OD or by pipe size?
By tube OD, in inch or metric. The list gives 1/8 in to 1 in as 3.175 mm to 25.4 mm and also 3 mm to 25 mm, so state the OD and alloy and the wall you need.
How should the coil be clamped along a run?
Support the run between ties and keep the tube from being pulled straight by its own coil memory. Clamp spacing is not fixed by the coil itself, so tie it to the rack layout you are following.
Related products

Tube Clamp
Tube Clamp: stainless clamp supporting instrumentation tubing against vibration. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Stainless Steel BA Tube
Stainless Steel BA Tube: bright annealed instrumentation tube for compression fittings. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →
Stainless Steel Precision Tube
Stainless Steel Precision Tube: tight-tolerance instrumentation tube for ferrule seals. FerruleX factory RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →