Skip to content

Need stainless steel fittings, valves or hose?

Barb Hose Connector — FerruleX stainless steel fittings

Barb Hose Connector

Barb Hose Connector: stainless barb to NPT/G/metric thread for soft hose. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Thread range
1/8"–1" / M5–M24
Type
Barb hose connector
Pressure
Low-pressure class; 25–300 psi across maker listings

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Size the barb by hose bore before the thread. The stem pushes into the hose; the opposite end threads into the port in ZG(R), NPT, G or M form. FerruleX supplies SS304, SS316 or SS316L, with copper and aluminium alloy available on request, across 1/8"–1" and M5–M24. Each stem carries a lead-in and a row of barbs to hold the bore without cutting it. The catalogue line quotes 3000 psi working pressure, which refers to the metal body: the hose and clamp set what the joint actually holds, so clamp behind the last barb. Listed media are liquid and gas, across energy, environmental, automotive, shipbuilding, petrochemical, construction, food processing and pharmaceutical work.

Ordering runs on three fields: hose bore, port thread and clamp. Give the bore in millimetres or inches and name the port thread as ZG(R), NPT, G or M; a size without a thread type is not enough to build from, and clamp type follows the hose rather than the fitting.

Stem
The stem carries a lead-in and a row of barbs for push-on hose.
Thread
Port end is threaded in ZG(R), NPT, G or M form.
Material
Bodies come in SS304, SS316 or SS316L, with copper and aluminium alloy on request.
Pressure
Catalogue working pressure is 3000 psi on the body, while hose and clamp set the joint limit.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
Thread range1/8"–1" / M5–M24
TypeBarb hose connector
PressureLow-pressure class; 25–300 psi across maker listings

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which thread form should be named for the port end?

Name it explicitly: ZG(R), NPT, G or M. The stem is sized from the hose bore, so a bore alone leaves the port end undecided and the part cannot be built.

How do the tapered and parallel port threads seal?

Tapered forms seal on the engaged thread itself. Parallel forms rely on a sealing washer or gasket at the shoulder, so state the form before the joint is designed.

Can an NPT connector be run into a ZG(R) port?

No. NPT and ZG(R) differ in pitch and flank angle, so they engage a few turns and then weep or split the port. Keep each form to its own side.

What torque should the threaded end be tightened to?

No torque figure is published, because it follows the thread size and the port material. Bring the joint up snug and stop before the hex or the port distorts.

Is anti-seize needed on the stainless thread?

Yes, where the joint will be broken again. Stainless against stainless can gall when run dry and fast, so a thin anti-seize film on the thread keeps the fitting serviceable.

Does the hose need a clamp, and does a ferrule apply?

A clamp does. The barbs resist pull-off rather than pressure, so the clamp sits behind the last barb. A ferrule set belongs to tube fittings and is not used on a barb stem.

Related products