Skip to content

Need stainless steel fittings, valves or hose?

Hex Head Plug — FerruleX stainless steel fittings

Stainless Steel Hex Head Plug — Sizes & Specs

Hex Head Plug: external-hex stainless steel pipe fittings blank for female ports. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Hex head plug
Threads
NPT 1/8–1 in typical; G / metric options
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

No tube end, no ferrule, no shoulder: the part closes a threaded female port, and its only interfaces are the thread and the hex. Body threads run the full length, so insertion depth is set by the port. The hex is turned solid with the body, giving an external drive that a standard open-end or adjustable wrench can reach. Range is 1/8 to 2 inch and M5 to M36, in ZG(R), NPT, G or M form, in SS304, SS316 or SS316L, with copper and aluminium alloy available. Service is liquid or gas, working pressure around 3000 psi. State thread form, size and alloy on the RFQ; samples can be cut to check seat depth before a batch run.

Seat depth is the one dimension worth checking before a large order: a plain-body plug sits lower than a flanged one and can bottom out in a shallow counterbore. Tapered forms seal on the thread, so tape goes on the male thread, not into the port.

Body
Fully threaded, with no flange shoulder to stop it.
Drive
External hex, turned with an open-end or adjustable wrench.
Size
1/8 to 2 inch and M5 to M36.
Pressure
Working pressure around 3000 psi, for liquid or gas.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeHex head plug
ThreadsNPT 1/8–1 in typical; G / metric options
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which thread forms can this plug be supplied in?

ZG(R), NPT, G and M forms, so it mates with the common tapered and parallel ports. Sizes run 1/8 to 2 inch and M5 to M36. Give the port form, not just the diameter, on the RFQ.

Does it seal on the thread or on a shoulder?

On the thread only. There is no flange shoulder and no separate seal, so the body runs full length and a tapered form closes the port by interference. Tape or compound goes on the male thread.

What is needed when the port is parallel rather than tapered?

A parallel port needs a washer or bonded seal under the hex to close the joint, because the thread itself will not seal. Ask for the parallel variant when the port is G or metric.

Can an NPT plug be run into a BSPT port?

No. The two tapers differ in pitch and angle, so a few turns may engage and then leak or crack the port. Match the thread form of the port and keep the two systems apart in stores.

How do you stop stainless plugs galling in a stainless port?

Stainless on stainless can pick up and seize, especially at the small sizes. Use a nickel-based anti-seize on the male thread, keep the thread clean, and avoid reworking a joint that has already been tightened.

Is a hex head plug the same as a cap?

No. The plug closes a female port from inside the thread; a cap goes over a male thread on the outside. Choose the plug where the port must stay flush and the head can sit below the surrounding face.

Related products