Skip to content

Need stainless steel fittings, valves or hose?

Flanged Hex Socket Plug — FerruleX stainless steel fittings

Flanged Hex Socket Plug

Flanged Hex Socket Plug: stainless plug with flange shoulder and internal hex. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Flanged hex socket plug
Threads
NPT 1/8–1 in typical; G / metric options
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A counterbored port closes best when the plug stops on a machined face rather than on the thread flank. A flange shoulder behind an internal hex fixes seating depth at the pocket, so the socket stays below the block surface. Typical positions are manifold ends, cylinder ports and instrument panels that finish flush. Threads run 1/8 to 2 in and M5 to M36 in NPT, G, ZG(R) or metric form. SS304 and SS316 are standard, with 316L, copper and aluminium alloy quoted on request. Liquid and gas, around 3000 psi. The flange is a stop, not a seal: a machined face can close metal to metal, a rougher counterbore needs a gasket or O-ring named on the drawing. Flange OD follows the pocket, not the thread, so give the counterbore diameter and depth.

Seat the shoulder on the counterbore face and the thread stops at a repeatable depth. Socket depth sets the hex key size available, so a deep pocket may rule out a short key. Thread form, flange diameter and sealing method are quoted from the drawing.

Seat
The shoulder stops the plug against the counterbore face at a fixed depth.
Threads
NPT, G, ZG(R) and metric, from 1/8 to 2 in and M5 to M36.
Materials
SS304 and SS316 as standard; 316L, copper and aluminium alloy on request.
Duty
Liquid and gas service at around 3000 psi.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeFlanged hex socket plug
ThreadsNPT 1/8–1 in typical; G / metric options
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which thread forms can this plug be cut with?

NPT, G, ZG(R) and metric are all available, from 1/8 to 2 in and M5 to M36. State the form on the enquiry, because the same nominal size is cut differently in each.

Does a tapered or a parallel thread seal better here?

A tapered thread such as NPT or ZG(R) closes on the thread flank and needs no separate seal. A parallel G thread does not seal on its own, so the flange face or a washer has to do that work.

What seals a parallel thread plug into a plain pocket?

A bonded washer under the flange, or an O-ring in a counterbore, is the usual answer. Metal to metal against a machined face can also work, but only when the face is flat and clean.

Can an NPT plug go into a BSPT port?

No. The thread angle, pitch and taper differ, so an NPT plug will not seat in a BSPT port and will leak under pressure. Match form to port and mark it on the drawing.

Will the stainless thread gall when it is tightened?

Austenitic stainless can gall, especially SS304, and a plug that is repeatedly run in and out is the usual place for it. An anti-seize compound on the thread limits the risk.

Does the plug finish flush with the block surface?

The flange sets the stop, so the hex socket can sit at or below the surface with no head standing proud. Give the counterbore depth and the required finish position on the drawing.

Related products