Skip to content

Need stainless steel fittings, valves or hose?

Pneumatic Silencer — FerruleX stainless steel fittings

Stainless Steel Pneumatic Silencer — Types & Sizes

Pneumatic Silencer: stainless exhaust muffler for solenoid and cylinder vents. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 (series dependent)
Type
Pneumatic silencer
Mount
Threaded exhaust
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Silencers screw into the exhaust port of a solenoid valve or cylinder and break up the air blast before it leaves the machine. The manual lists three body forms: straight, elbow and reducing, over thread sizes from DN6 to DN100 (1/8 to 4 inch), with ZG(R), NPT or G threads. Bodies come in 304, 316 or 316L stainless, series dependent. Working pressure is quoted at about 250 psi. Straight bodies suit a port facing outward, elbows where the exhaust must turn away from an operator, and reducing bodies where the port is larger than the silencer. Service fields are automotive and shipbuilding, petrochemical, construction, food processing and pharmaceutical plant. Send the thread and the flow you need to pass.

Attenuation depends on free area, not body length, so a silencer that passes exhaust too slowly will lengthen cylinder return. Size by thread first and confirm the element area clears the valve port. Elbow bodies turn the blast away from operators, and reducing bodies adapt a larger port to a smaller silencer. Send the port thread and the cylinder bore.

Body forms
Straight, elbow and reducing forms from DN6 to DN100, or 1/8 to 4 inch.
Threads
ZG(R), NPT or G threads.
Material
304, 316 or 316L stainless.
Pressure
Working pressure quoted at about 250 psi.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 (series dependent)
TypePneumatic silencer
MountThreaded exhaust
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which thread form should I state on the RFQ?

State the port thread as ZG(R), G or NPT. ZG(R) and NPT are tapered, G is parallel, so the silencer is built to the port thread on your valve drawing rather than to the hose end.

Does a parallel G thread need a sealing washer?

Yes. A G thread is parallel, so it seals on a face or washer, not on the flanks. Fit the silencer against a flat port face and the joint holds at working pressure.

Can I fit an NPT silencer into a BSPT port?

No. NPT and BSPT share a similar look but differ in thread angle and pitch, so the pair engages only a few turns, then leaks or tears the threads. Order the thread the port is cut to.

Do stainless silencer threads need anti-seize?

Stainless on stainless galls when tightened dry, especially after a few removals. A thin anti-seize compound on the thread keeps the body removable from the port without damaging the flanks.

Which body form suits an exhaust port that faces the operator?

Take an elbow body. It turns the blast away from the operator instead of blowing across the machine, and the straight form stays the choice where the port already points clear.

Will fitting a silencer slow the cylinder return stroke?

Only if the element free area is smaller than the port it serves. Match the silencer to the exhaust port and the return time stays close to the bare port.

Related products