Skip to content

Need stainless steel fittings, valves or hose?

Compression Plug Kit (3-Piece) — FerruleX stainless steel fittings

Compression Plug Kit (3-Piece)

Compression Plug Kit (3-Piece): blank unused stainless steel compression fittings ports. FerruleX factory RFQ. Stocked sizes ship fast. Fast stock shipping.

Brand
FerruleX
Material
SS316 / SS316L / SS304
Compatibility
Compression OD 3–25 mm / 1/8"–1"
Type
3-piece plug kit
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A port left open after commissioning needs closing to the same standard as the joint it replaces, and this kit does it with a compression connection rather than a weld. The three pieces ship as one set, sized by tube OD from 3 mm to 25 mm (1/8 in to 1 in) in SS316, SS316L or SS304, with copper available. Connection is compression or threaded, for liquid and gas service. Standard kits are rated around 1,000 psi; the high-pressure version reaches 4,500 psi. Order by OD. Mark every plugged port on the line drawing, and do not reopen one without a fresh ferrule set.

A compression port is closed by making up the same joint a tube would, ferrule and all, so the plug takes the port thread and the tube OD together. Keep the ferrule pair with its plug; one compressed once will not seat again. Stock the common ODs as complete sets.

Sizes
Tube OD from 3 mm to 25 mm, or 1/8 in to 1 in.
Materials
SS316, SS316L and SS304, with copper available.
Pressure
Around 1,000 psi standard, up to 4,500 psi high-pressure.
Service
Liquid and gas lines, compression or threaded fixing.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS316 / SS316L / SS304
CompatibilityCompression OD 3–25 mm / 1/8"–1"
Type3-piece plug kit
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which thread form should I state on the order?

State the port thread as NPT, BSPT, BSPP or metric; the kit is machined to that port. The tube OD only sizes the ferrule and nut, so give both when the port was never tubed.

When do I use a plug rather than a cap?

A plug enters the port and seals inside it, so it closes a fitting that has a thread and a seat. A cap covers the outside of a tube end or a male thread, and needs that projection to grip.

Can I reuse the ferrule from a tube I removed?

No. The ferrule is already compressed to that tube, so it will not grip the plug stub at the same depth. Fit the new ferrule and nut that come with the kit, as a matched set.

Does the plug leave a dead volume in the port?

Yes, a short pocket remains between the plug nose and the port shoulder. On a line that will be cleaned or drained, note that pocket on the drawing so the next flush reaches it.

Will a stainless plug gall in a stainless port?

It can. Stainless on stainless work-hardens at the thread and may seize on make-up, especially after a hot cycle. Apply a compatible anti-seize to the thread, and keep it off the ferrule face.

How tight should the nut be?

Hold the body with one spanner and turn the nut with the other until the ferrule grips, then a small further turn to compress it. More torque crushes the ferrule without improving the seal.

Related products