Skip to content

Need stainless steel fittings, valves or hose?

Hex Socket Plug — FerruleX stainless steel fittings

Stainless Steel Hex Socket Plug — Types & Sizes

Hex Socket Plug: internal-hex stainless steel pipe fittings blank for female ports. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Hex socket plug
Threads
NPT / G / Metric
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A recessed hex drive lets this plug turn with an Allen key where a spanner will not reach, and sit below the port face. The body is threaded only, from 1/8 to 2 inch or M5 to M36, with ZG(R), NPT, G and M thread forms. SS304 and SS316 are the standard alloys; 316L, copper and aluminium are also offered. Service is liquid or gas, working pressure around 3000 psi. No tube OD and no ferrule appear on the part: the thread is the only interface, so size, form and alloy settle the order.

A socket plug is a blind closure: it seals at the thread and carries no through bore, so port depth decides how far it may travel. Confirm the port is deep enough before final seating, and keep the hex cavity free of sealant so the key engages to full depth.

Drive
Internal hex, recessed into the body.
Range
Thread size 1/8 to 2 inch, or M5 to M36.
Threads
ZG(R), NPT, G and M forms.
Alloys
SS304 and SS316 standard; 316L, copper and aluminium by request.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeHex socket plug
ThreadsNPT 1/8–1 in typical; G / metric options
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which thread forms can this plug be supplied in?

ZG(R), NPT, G and M forms are all produced, and the thread form and size must be stated together on the enquiry because neither alone identifies the part.

How does the thread form decide how the plug seals?

Tapered NPT and ZG(R) threads seal on the thread flanks as the plug is driven in, while parallel G and M threads do not, and need a sealing face or washer instead.

Does a parallel-thread plug need a washer?

Yes. A parallel G or M plug relies on a gasket or bonded washer at the port face, since the thread itself provides no interference, so check the port has a seat for one.

Can an NPT plug be used in a BSPT port?

No. The two forms have different thread geometry and will engage only a short distance before binding or leaking, so the port form must be identified before ordering.

Should anti-seize be applied to a stainless plug?

Stainless threads gall readily, so a thin anti-seize compound on the thread is sensible. Keep it clear of the hex cavity, since sealant there stops the key seating to full depth.

When should I use a plug rather than a cap?

A plug threads into a female port and closes it from within the bore, while a cap fits over an external thread. Choose the plug where the port is female and must stay flush.

Related products