Skip to content

Need stainless steel fittings, valves or hose?

Female Threaded Tee — FerruleX stainless steel fittings

Female Threaded Tee

Female Threaded Tee: all-female stainless steel pipe fittings for branching headers. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Female threaded tee
Threads
NPT / G / Metric
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Branch bodies in this series carry three female ports and take their size from 1/8 in to 2 in, or M5 to M36 where the thread is metric. Each port is threaded in ZG(R), NPT, G or M, so a run can put a tapered pipe thread on one leg and a straight metric thread on another. Equal bodies are standard; reducing bodies and mixed thread sets are built to order. Body material is SS304, SS316 or SS316L, and the medium may be liquid or gas. Rated working pressure sits around 3000 psi, with the lowest-rated port governing the assembly. Quote port size, thread form and material per port.

Three female seats on one body remove the adapters a male-ended branch would need, and they let a valve or gauge go straight onto the run. Equal and reducing bodies share the same pattern. Sealant or a washer follows the thread form in use, since a tapered ZG(R) or NPT port seals differently from parallel G or M.

Ports
Three female threaded ports, so a valve or gauge threads straight onto the body.
Sizes
The range runs 1/8 in to 2 in, with M5 to M36 on the metric thread.
Threads
Each port takes ZG(R), NPT, G or M, and the four standards are not interchangeable.
Rating
Working pressure around 3000 psi, with the lowest-rated port setting the limit.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeFemale threaded tee
ThreadsNPT / G / Metric
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Can the three ports carry different thread standards?

Yes. Each of the three ports is cut to the standard it will receive, so NPT, ZG(R), G or M can be mixed on one body. Say which standard and size applies to each port on the RFQ.

What if the male fitting offered to the port is a different standard?

It will not seal. NPT, ZG(R), G and M differ in thread angle and pitch, so a mismatched pair either jams part way or threads on without contact at the flank. Match the standard, not the nominal size.

Does the 1/8 in to 2 in range describe the bore or the thread?

It is the nominal pipe size, not the thread diameter, and each port is cut to suit that body size. Quote nominal size and thread standard together on the RFQ.

How should the threads be sealed, and how do you prevent galling?

A tapered NPT or ZG(R) port seals on the thread, so use tape or paste sparingly. Parallel G or M ports need a washer at the seat. Stainless threads gall easily, so keep them clean and lubricated.

Is a tee or a Y body better for a branch?

A tee gives a right-angle branch and keeps the run straight, which suits gauges and valves mounted on the header. A Y body is chosen where the branch line needs a gentler sweep for flow.

What temperature can the assembly work at?

The body is set by the material grade, not by the thread. The practical limit is usually the sealant, tape or washer at each port, so check those against the service temperature before ordering.

Related products