Skip to content

Need stainless steel fittings, valves or hose?

Y-Type and T-Type Tee Fitting — FerruleX stainless steel fittings

Y-Type and T-Type Tee Fitting

Y-Type and T-Type Tee Fitting: stainless Y/T branching pipe fittings, NPT/G/metric. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Y-type / T-type tee
Threads
NPT / G / Metric
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Two branch forms share one port range: the Y tee, whose legs leave the run off-axis, and the T tee, whose branch leaves square. Ports run 3 mm to 25 mm and 1/8 in to 1 in (3.175 mm to 25.4 mm), with M10 to M24 thread sizes cut as ZG(R), NPT, G or M. Ends are supplied push-in or threaded, and the three ports are quoted one by one. Bodies come in 304, 316 or 316L stainless, with copper available on request. Service is liquid or gas. Working pressure for the series is listed at about 3000 psi. Issue the branch size, thread standard and end form per port with the drawing.

Choose the Y where the branch leaves the run off-axis, the T where it leaves square. A 3 mm push-in end can sit on the same body as an M10 threaded end. Thread form follows the buyer: ZG(R), NPT, G or M. Branch size, thread and end type go on the drawing; nothing is cut before sign-off.

Body form
Y tee and T tee branch patterns on one port range.
Port range
3 mm to 25 mm tube, 1/8 in to 1 in and M10 to M24.
Threads
ZG(R), NPT, G or M, cut to the drawing.
Material
304, 316 or 316L stainless, with copper on request.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeY-type / T-type tee
ThreadsNPT / G / Metric
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Should I specify a Y tee or a T tee for a branch take-off?

Use the T where the branch leaves the run square and the Y where it has to leave at an angle and follow the route. Both forms cover the same port range, so the choice is about piping geometry rather than capacity.

Which thread forms can be cut on the tee ports?

ZG(R), NPT, G or M, chosen per port and cut to the drawing. The taper and parallel forms do not interchange, so name the standard on the quote and not only the size.

Is an M10 or M24 thread the same as a nominal pipe size?

No. M10 to M24 are thread sizes; the 1/8 in to 1 in figures are the tube and port sizes on the same body. They are separate systems, so quote the thread and the port size on the drawing.

Can threaded and push-in ports be mixed on one tee?

Yes. Ends are supplied push-in or threaded, so a push-in leg can sit beside a threaded one on the same body, and each of the three ports is written separately on the drawing.

What sealant should go on the stainless threads?

Use a thread sealant rated for the service and apply it sparingly to the thread, not into the bore. Stainless threads gall easily, so keep the joint clean and avoid a dry, over-tightened assembly.

What temperature range can the tee be used at?

The body is stainless steel, so the limit sits with the seal at the push-in end and the sealant on the threaded port, not with the tee. State the operating temperature and the media when the quote is requested.

Related products