Skip to content

Need stainless steel fittings, valves or hose?

Investment Cast Elbow — FerruleX stainless steel fittings

Investment Cast Elbow

Investment Cast Elbow: economical stainless cast elbow for pipe direction changes. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Investment cast elbow
Process
Investment casting
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Two threaded ports set at an angle inside one cast body: that is the whole part. FerruleX casts it in 304, 316 or 316L, with DN6 to DN100 (1/8 to 4 inch) as the size span. Threads are ZG(R), NPT or G as ordered; ends are threaded or reducing. Working pressure is listed at about 250 psi, which places it on utility lines rather than instrument runs. No further class is specified for the body, so the line class is agreed when the order is written. Castings arrive as-cast; specify a polish where the bore must be clean. Send angle, size, thread and alloy for a factory quote.

Sizes run DN6 to DN100, or 1/8 to 4 inch, in 304, 316 and 316L. End types are threaded or reducing. Threads offered are ZG(R), NPT and G. Working pressure is listed at about 250 psi. Angles outside the standard range are cast from drawings.

Range
Sizes run DN6 to DN100, or 1/8 to 4 inch.
Threads
ZG(R), NPT and G forms are available.
Pressure
Working pressure is listed at about 250 psi.
Finish
Bodies arrive as-cast; a polish is specified separately.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeInvestment cast elbow
ProcessInvestment casting
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

How do the cast grades map to 304 and 316?

CF8 is the cast equivalent of 304 and CF8M the cast equivalent of 316. State the alloy on the RFQ, and the pattern is made to that grade before pouring.

Is the cast elbow suitable for chloride or marine service?

The 316 and 316L bodies suit chloride exposure better than 304, but a cast surface holds chloride in ways bar stock does not, so a polished bore and a stated chloride level help the selection.

How is porosity handled in the casting?

Porosity is a normal risk in any casting, so the body is checked before it leaves the foundry. Tell us which sections must stay sound for your line and the pattern is reviewed against that.

Is the wall thinner on the outside of the bend?

Casting keeps wall thickness around the bend better than a bent tube, because the metal fills the mould rather than being stretched thin. Ask for the wall section to be shown on the drawing.

What paperwork comes with a cast elbow order?

The packing list states the alloy, the size and the thread form as ordered. Anything further, such as material paperwork or an inspection record, is agreed on the RFQ before the order is written.

Can a small quantity be cast, or is there a minimum?

The pattern cost is what sets the minimum, not the pour. A single casting can be made, but a small order carries the pattern and setup, so combine sizes where you can.

Related products