Skip to content

Need stainless steel fittings, valves or hose?

Investment Cast Straight Fitting — FerruleX stainless steel fittings

Investment Cast Straight Fitting

Investment Cast Straight Fitting: stainless cast coupling, DN6–DN100, NPT/G threads. SS304/316. FerruleX factory RFQ. Stocked sizes ship fast for OEM.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Size
DN6–DN100 / 1/8"–4"
Ends
Thread / reducing
Pressure
Class 150 typical

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

The body comes off the shell as a casting and the threads are cut afterwards, so judge the part by its thread rather than its bore: the ID stays as-cast. Grades are 304, 316 and 316L; sizes run DN6 to DN100, which is 1/8 to 4 inch. Tapping is ZG(R), NPT or G, chosen per end, since nothing forces both ends of a straight to share a standard. Equal and reducing bodies belong to the same family. Working pressure sits near 250 psi as listed. Applications named in the manual are petrochemical, food processing, pharmaceutical, construction, automotive and shipbuilding plant. It is not instrument tube and does not replace a fitting rated to the tube.

Both ends carry a thread code, and the two codes need not match, which is the detail most often left off a cast straight order. Equal and reducing bodies are options in the same range, and ZG(R), NPT or G is tapped to the order, so name the form for each end and the taps follow.

Grades
SS304, SS316 or SS316L.
Threads
ZG(R), NPT or G, tapped per end.
Range
DN6 to DN100, or 1/8 to 4 inch.
Pressure
Around 250 psi working pressure.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
SizeDN6–DN100 / 1/8"–4"
EndsThread / reducing
PressureClass 150 typical

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Do the cast grades match the 304 and 316 listed for this part?

The cast equivalents are CF8 for 304 and CF8M for 316, with the low-carbon variant for 316L. Buyers quote the wrought designation and the foundry converts it, so name the grade rather than the casting code.

How is porosity handled on a cast straight body?

Porosity is a casting reality, so it is judged where it matters: the thread roots and the seating face. A body machined into a gas pocket at the thread is scrap, and no amount of re-tapping recovers it.

Does a cast body carry the same rating as a wrought fitting?

No. Cast bodies are rated below wrought ones of the same size, and this range is listed at Class 150 typical, around 250 psi working pressure, so a cast straight should not be swapped into a line sized on a wrought rating.

What documentation can be supplied with the order?

Documentation is agreed at the RFQ, not assumed from the page. State the reports the inspector needs and they are quoted with the parts, since a document request raised after casting becomes a separate job.

Is 316L the right choice for chloride and marine service?

For chloride-bearing and marine atmospheres the molybdenum grade is the usual pick, so 316 or 316L rather than 304. Shipbuilding is named among the applications, and there the grade is stated per line item.

Can small quantities be cast, or is there a minimum run?

Investment casting needs a pattern and a shell for each run, so small lots are quoted against that setup rather than refused. Below that point a body machined from bar is the practical alternative.

Related products