Skip to content

Need stainless steel fittings, valves or hose?

Investment Cast Cap — FerruleX stainless steel fittings

Investment Cast Cap for Stainless Fittings — 316L

Investment Cast Cap: stainless cap for unused ports, thread or compression ends. SS304/316. FerruleX factory RFQ. Stocked sizes ship fast for export.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Type
Investment cast cap
Ends
Thread / compression
Order
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Three link forms close the same port: a compression end that takes tube, a male thread and a female thread, the latter two in ZG(R), NPT or G. Investment-cast caps come in 304, 316 or 316L stainless. Tube sizes are Φ3 mm to Φ16 mm, with Φ1/8 in to Φ1 in covering 3.175 mm to 25.4 mm, and M10 to M24 on the metric thread range. The manual puts working pressure at about 2000 psi / 12 MPa and limits service to ambient temperature. That combination points at instrument and manifold blanks rather than steam headers. A spare nozzle, a future tie-in and a hydrostatic test point are the usual jobs. Give the link form, size, thread standard and alloy when the factory quote is raised.

A blanked branch is still a nozzle on the line, so the store has to issue the exact cap the drawing calls for: compression, male or female, in ZG(R), NPT or G. Record the standard beside each blank on the isometric, and the crew will not force a G body onto an NPT stub.

Threads
Male or female, in ZG(R), NPT or G.
Sizes
Φ3 to Φ16 mm tube, Φ1/8 to Φ1 in, M10 to M24.
Pressure
Listed at about 2000 psi / 12 MPa at ambient.
Alloy
Cast in 304, 316 or 316L stainless.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
TypeInvestment cast cap
EndsThread / compression
OrderFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Are CF8 and CF8M the same as the 304 and 316 listed on this page?

CF8 and CF8M are the cast designations behind the 304 and 316 grades listed here. The drawing should name one, not just stainless, because the two alloys are not interchangeable at the same duty.

Is 316L the grade for chloride or marine exposure?

For chloride or marine exposure, 316L is the grade to specify; 304 is left for benign indoor work. The cap body and its thread then sit in the same alloy, with no mixed-metal couple at the port.

How is porosity handled on a cap that has to seal?

Porosity is normal in any casting and cannot be excluded by a purchase order alone. On a cap the critical spots are the sealing face and the thread root, where a void would show as a leak.

What happens if a thread is cut into a porous area of the casting?

Threads on a cast cap are cut after casting, so a void opened by the tool is found at that stage. A cap that leaks at the thread is a casting defect, not a torque problem.

What documents come with a cast lot?

A casting is quoted against the drawing, and the alloy grade is carried on the lot paperwork. Say at RFQ stage which inspection documents the order needs, so they are raised with the cast and not chased afterwards.

Why is the rating about 2000 psi / 12 MPa rather than a wrought fitting figure?

The 2000 psi / 12 MPa figure is quoted for the cast cap body itself. A wrought fitting of the same size and alloy may be rated differently, so the two numbers should not be swapped across.

Related products