Skip to content

Need stainless steel fittings, valves or hose?

Investment Cast Round Straight Fitting — FerruleX stainless steel fittings

Investment Cast Round Straight Fitting — Types & Sizes

Investment cast round straight stainless fitting for pipe and tube runs. SS304 / SS316. FerruleX factory RFQ. Fast stock shipping.

Brand
FerruleX
Material
SS304 / SS316
Type
Investment cast round straight
Ends
Confirm on RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A round cast body spans DN6 to DN100, 1/8 to 4 inch, in 304, 316 or 316L stainless, with ZG(R), NPT or G threads cut per end. Either end can be straight or reduced, so a line that steps down needs no second adapter. Working pressure is listed at about 250 PSI, a threaded utility class rather than an instrument class; do not substitute the casting where a compression fitting sets the line rating. Listed service is petrochemical, construction, food processing and pharmaceutical plant, plus automotive and shipbuilding. Send the thread code for each end, the DN and whether the bore reduces; the factory then confirms pattern stock against a new tool.

The round outline is chosen when the run is clamped close to a frame and a hex body has no room for a spanner. Name the thread standard first, ZG(R), NPT or G, then the DN and any reduction, since the thread decides which pattern the foundry uses. Grades run 304, 316 and 316L.

Size
DN6 to DN100, or 1/8 to 4 inch.
Threads
ZG(R), NPT or G, quoted per end.
Material
SS304, SS316 or SS316L.
Rating
About 250 PSI working pressure.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeInvestment cast round straight
EndsConfirm on RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Does the listed 304 grade correspond to CF8 and the 316 grade to CF8M?

Yes. The cast equivalents are ordered by the stainless grade on the drawing, so CF8 covers the 304 line and CF8M the 316 line; ask for the low-carbon version when 316L is specified.

Is the cast body suitable for chloride service?

Chloride resistance follows the grade rather than the casting route. The 316 and 316L versions are the ones to quote for chloride-bearing media; state the service on the RFQ so the grade is not swapped to 304.

Does the cast round body carry the same rating as a wrought fitting?

No. The listed figure is about 250 PSI working pressure, a threaded utility class, while a wrought or compression fitting may set a higher line rating; do not use the casting to raise the class of a run.

How is porosity in the cast wall handled?

Investment casting keeps the as-cast skin sound, but isolated porosity can still appear. It is assessed against the wall section the part actually needs, and a body that fails that check is not shipped.

Can cutting the thread open porosity in the body?

Cutting a thread removes material, so a pore just under the skin can be exposed. That risk is why the wall section is set before the thread is cut, and why a machined part is inspected after the operation.

Does a small trial order make sense before a full batch?

A cast body needs a pattern, so the first order is quoted against that tooling rather than against stock. Give the annual quantity with the RFQ and the factory will confirm whether a trial batch is worth running.

Related products