Skip to content

Need stainless steel fittings, valves or hose?

Investment Cast Tee — FerruleX stainless steel fittings

Stainless Steel Investment Cast Tee — Types & Sizes

Investment Cast Tee: economical stainless cast tee for three-port branching. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Investment cast tee
Process
Investment casting
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A tee puts a branch on a run, and casting the body is the cheap route to one in 304 or 316 stainless. FerruleX investment cast tees run DN6 to DN100, roughly 1/8 to 4 inch, threaded NPT, G or ZG(R) on all three ports. The factory rates the family at about 250 psi working pressure, which puts it on utility duty. Ports come equal or reducing, and a reducing body reads the same as an equal one until the ports are gauged, so label each cast tee by port pair in the crib. Bore, thread form and pressure class follow the drawing; send it with the RFQ.

Two ports sit on the run and the third branches off, so a reducing tee needs the branch size stated apart from the run size. Cast tees do not replace forged instrument tees where vibration is present. FerruleX can passivate cast lots when the specification asks for it.

Range
DN6 to DN100, roughly 1/8 to 4 inch.
Threads
NPT, G or ZG(R), cut on all three ports.
Pressure
About 250 psi working pressure as listed.
Ports
Equal or reducing, per the drawing.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypeInvestment cast tee
ProcessInvestment casting
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Is the tee supplied as CF8 or CF8M?

SS304 is cast as CF8 and SS316 as CF8M, so the two grades are not interchangeable on one lot. Order by grade as well as by material, because the pour is made to the grade named on the RFQ.

Can the tee be used in chloride or marine service?

For chloride duty order SS316, cast as CF8M. The 304 grade is for general service, not for a salt-bearing line, and even 316 is a material choice rather than immunity from attack.

How does the cast rating compare with a wrought tee?

The family is listed at about 250 psi working pressure, which is a cast-fitting figure. A wrought tee is rated on the tube it joins, so do not carry the cast figure onto a line that must hold the tube rating.

What about porosity in the casting?

Investment casting gives a sound outer skin, but gas porosity can still sit just under it and open when a port is threaded. If the port area must be free of it, say so on the RFQ.

Which documents come with a lot?

The grade is carried on the carton label and recorded against the lot, so a shipment can be traced back to its pour. Any further documents or test reports must be named on the RFQ and are not standard.

Is a cast tee worth it at low volume?

A cast tee needs a pattern and a pour behind it, so a small lot is normally bought from a machined or forged range instead. Send the annual quantity and the lot size and we will say which route fits.

Related products