Skip to content

Need stainless steel fittings, valves or hose?

Straight Compression Ball Valve — FerruleX stainless steel fittings

Straight Compression Ball Valve — Types & Sizes

Straight Compression Ball Valve: stainless steel ball valve, double-ferrule ends, 930 psi. SS304/316. FerruleX RFQ. Stocked sizes ship fast.

Brand
FerruleX
Material
SS316 / SS316L / SS304
Ends
Compression (double ferrule)
Pattern
Straight
Pressure
930 psi / 6.4 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A 930 psi (6.4 MPa) ball valve is an isolating valve. It suits an instrument or utility branch that has to be shut off for maintenance, not a process line that throttles flow. The straight pattern keeps the tube run on one axis, and the ferrule compression ends make the joint without thread sealant or a welder. Before you select it, check the temperature rather than the pressure: instrument and utility branches usually run far below 930 psi, but the working ceiling is around 70 °C, and that is the figure that rules this valve out of most process duty. The 930 psi figure is the valve rating, not the tube rating, so the tube is confirmed separately.

Straight-pattern 930 psi (6.4 MPa) stainless ball valve with ferrule compression ends for instrument and utility branch isolation. Ambient service with a working ceiling around 70 °C. Bodies in 316, 316L or 304 stainless, sizes 3–25 mm and 1/8–1 in. Send the tube specification with the RFQ.

Pressure
930 psi (6.4 MPa) working pressure, ambient service, ceiling around 70 °C.
Sizes
3–25 mm and 1/8"–1", with M10–M24 and ZG(R) / NPT / G threads on other ends.
Ends
Ferrule compression ends on this pattern; weld and thread styles are in the group.
Note
930 psi is the valve rating, not the tube rating.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS316 / SS316L / SS304
EndsCompression, double ferrule
Tube OD3–25 mm / 1/8"–1"
PatternStraight
Pressure930 psi / 6.4 MPa at ambient
TemperatureAmbient; working ceiling around 70 °C

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Should I choose the straight body or an angle pattern?

The straight body keeps the tube run on one axis and suits an inline branch. An angle pattern replaces an elbow where the line has to turn, saving a joint but fixing the direction.

Is 930 psi enough, or do I need a high-pressure class?

930 psi (6.4 MPa) is the utility and instrument branch class. Above that rating this body style is not the answer; specify a high-pressure pattern and confirm the tube rating separately.

What does the 70 °C working ceiling rule out?

Steam, hot oil and most process lines. The ceiling suits ambient instrument and utility duty, so if the branch runs warm, check the actual temperature before ordering rather than after.

Can I use it to throttle flow?

No. It is an isolating valve with a quarter turn from open to closed. Holding it part-open erodes the seat edge, so metering belongs on a needle or throttle valve in the line.

Can I rotate the valve after the ferrules are made up?

Set the handle position before the final tighten. The compression joint is not a union, so once the ferrules are pulled up the body orientation is fixed and turning it will damage the joint.

Does the isolated side need venting?

Yes. With the ball closed, liquid stays trapped between the ball and the downstream seat and can hold pressure. Bleed or drain that section before breaking the joint, and do not rely on the valve to vent it.

Related products