Skip to content

Need stainless steel fittings, valves or hose?

5-Valve Manifold — FerruleX stainless steel fittings

5-Valve Manifold

5-Valve Manifold: adds drain and vent for transmitter calibration work. SS304/316 stainless. FerruleX factory RFQ — confirm ports and pressure class.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Ports
1/8"–1" / M10–M24
Configuration
2 blocks, 1 equalizer, 2 vents
Pressure
4600 psi / 32 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

The five-valve body is the three-valve arrangement with a vent added to each leg: two blocks, one equalizer, two vents. That extra pair is the reason to specify it — a technician can vent the high and low sides independently, blow down a plugged impulse line, or drain one leg for calibration without breaking a threaded joint. It earns its cost where calibration is frequent or where the process fluid has to be routed somewhere specific when it comes out. It is not automatically a double block and bleed, and the vents are not interchangeable with drains by name alone: check which ports on the drawing carry which function before the procedure is written. The group runs 4600 psi (32 MPa) at ambient, with 1/8"–1" and M10–M24 ports in 304, 316 or 316L.

Three-valve core plus a vent on each leg: two blocks, one equalizer, two vents, so the high and low sides can be vented or drained independently during calibration. 4600 psi (32 MPa) at ambient, ports 1/8–1 in and M10–M24. Confirm which ports are vents and which are drains on the drawing before writing the procedure.

Extra pair
A vent on each leg, independent of the equalizer.
When worth it
Frequent calibration, blowdown, or controlled venting of the fluid.
Not by name
Five valves does not by itself mean double block and bleed.
Limits
4600 psi (32 MPa) at ambient temperature.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
Ports1/8"–1", M10–M24
Configuration5 valves: 2 blocks, equalizer, 2 vents
InstrumentDifferential-pressure transmitter
Pressure4600 psi / 32 MPa
TemperatureAmbient service

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Can every port be isolated on its own?

Yes. The two block valves isolate the high and low legs, the equalizer bridges them, and each vent carries its own valve, so one port can be closed while the rest stay in service.

What pressure can the assembly hold?

The group is rated 4600 psi, or 32 MPa, at ambient temperature. That figure applies to the assembled manifold with all five valves fitted, so do not read it from a single valve.

Can one leg be vented while the other stays live?

That is the point of the extra pair. Each vent sits on its own leg, so the high side can be bled down while the low side remains under process pressure and the transmitter stays isolated.

Are the vents meant for throttling flow?

No. They are open or shut for venting and draining, not for regulating flow. Where a controlled bleed is needed, fit a needle valve downstream rather than cracking the vent partly open.

Do the ports come in NPT or BSP thread?

Inch ports from 1/8 to 1 in and metric ports from M10 to M24 are made to order. State the thread form on the enquiry, because an NPT male will not seal in a BSP female.

What seat material is fitted?

The seat and packing are chosen for the fluid and the temperature, so they are confirmed at quotation rather than fixed by the part number. Give the medium and the operating temperature with the enquiry.

Related products