
Compression Straight Union, 316L, NPT Threads
Compression Straight Union: stainless steel compression fittings, equal tube-to-tube double ferrule. FerruleX factory RFQ. Stocked sizes ship fast.
- Brand
- FerruleX
- Material
- SS316 / SS316L / SS304
- Tube OD
- 3–25 mm / 1/8"–1"
- Type
- Straight compression union
- Pressure
- 1000 psi standard / 4500 psi high-pressure
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
A compression straight union joins two equal tube ends with double ferrules and no weld bead in the line. FerruleX unions run SS316/SS316L/SS304 across OD 3–25 mm and 1/8"–1" for instrumentation and light process tubing, so inline repairs, skid tubing and analyzer runs stay demountable for future instrument swaps. The catalog rating is 1000 psi standard and 4500 psi on the high-pressure series, with the body designed above 1.2× the tube's own maximum. Whether the joint seals is decided by tube preparation rather than torque: use fully annealed tube below HRB 90 / HV 190 to ASTM A269 or GB/T 14976, insert it until it bottoms in the body, and leave at least 10 mm of straight tube beyond each nut so the ferrule seats without fighting a bend. Above 230 °C (450 °F) specify the high-temperature version. Quote tube OD and alloy preference to FerruleX — stocked unions ship fast on export RFQs.
Unions are the preferred break point when a transmitter must come out of line without cutting tube. Leave at least 10 mm of straight tube beyond each nut so the ferrules seat without fighting a nearby bend. FerruleX can supply matched nut/ferrule spare kits on the same RFQ for field stores. Equal-size double-ferrule union. Insert tube to shoulder, then tighten nut. SS304 / SS316 / SS316L.
- Tube prep
- Fully annealed, below HRB 90 / HV 190; ASTM A269 or GB/T 14976.
- Seat
- Insert the tube until it bottoms; 10 mm straight beyond each nut.
- Pressure
- 1000 psi standard, 4500 psi high-pressure; body above 1.2× tube max.
- Temperature
- Table range -40 to 150 °C; above 230 °C use the high-temp series.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS316 / SS316L / SS304 |
| Tube OD | 3–25 mm / 1/8"–1" |
| Type | Straight compression union |
| Pressure | 1000 psi standard / 4500 psi high-pressure series |
| Temperature | -40 to 150 °C table range; high-temp series above 230 °C |
| Tube standard | ASTM A269 / GB/T 14976, fully annealed |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
How should the tube end be prepared before insertion?
Cut square with a tube cutter and deburr both the outside edge and the bore, then wipe the end clean. A burr or a slanted cut lets the ferrule ride up instead of seating squarely.
How deep does the tube go into the union body?
Push the tube in until it bottoms on the shoulder inside the body, then tighten the nut. If it stops short of the shoulder, the ferrule cannot drive onto clean tube.
Do I tighten by torque or by turns?
Work by turns from finger tight, not by a torque figure, because friction varies with lubricant and thread condition. Hand tight plus the specified fraction of a turn seats the ferrules repeatably.
Can I remake the joint with the same ferrules?
Yes. The ferrules are swaged onto the tube, so remake by loosening the nut and re-tightening to the same point. Fit new ferrules only when the tube is cut back and re-inserted.
A joint leaks. Is it the tube end or the thread?
Dry the joint and watch where the weep returns. A leak at the nut and ferrule means tube or ferrule seating; a leak at the NPT end means thread engagement, so the two are fixed differently.
Is the pressure rating fixed, or does tube wall matter?
The catalog figure assumes tube that matches the fitting series. Thin-wall tube or elevated temperature lowers what the assembly holds, so the 1000 psi standard and 4500 psi high-pressure ratings apply within the table range.
Related products

Compression Reducing Union — 316L, Many Sizes
Compression Reducing Union: stainless steel compression fittings joining unequal tube OD. SS316/304. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →
Compression Male Elbow Connector
Compression Male Elbow Connector: 90° stainless steel compression fittings, tube to male thread. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →
Compression Union Elbow
Compression Union Elbow: 90° stainless steel compression fittings, tube-to-tube double ferrule. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →
Stainless Steel Compression Male/Female Tee — Sizes
Compression Male/Female Tee: stainless steel compression fittings tee with thread branch options. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →