Skip to content

Need stainless steel fittings, valves or hose?

SS Corrugated Hose — Male/Female Thread — FerruleX stainless steel fittings

SS Corrugated Hose — Male/Female Thread: Sizes

SS Corrugated Hose — Male/Female Thread: corrugated stainless steel hose, SS304/SS316, Φ6–Φ100. FerruleX factory RFQ. Stocked sizes ship fast. OEM RFQ welcome.

Brand
FerruleX
Material
SS304 / SS316
Hose OD
Φ6–Φ100
Ends
Male/female thread
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Two threaded ends let the corrugated section absorb movement that rigid tube would fight. Stock spans OD Φ6, Φ8, Φ10, Φ13, Φ16, Φ20, Φ25, Φ32, Φ38, Φ51, Φ64, Φ75 and Φ100 in 304 or 316 stainless, with non-standard builds made to order. The listed duty is wider than fluid alone: construction, power, heating pipework, petrochemical, smelting, aerospace and automation instrument runs, plus precision optical scale circuits, industrial sensors and electronic equipment wiring served as cable protection. Give the port thread on each end, the hose OD and the exposed length, and say whether the bore carries medium or cable. The factory builds to that description, mixed genders included.

Both ends threaded means the assembly spins onto the ports with no welding and no ferrules to swage. The order reduces to four lines: hose OD across the Φ6–Φ100 range, the thread cut at each end, exposed length, and alloy — 304 or 316. Male one side and female the other is what this SKU covers; state both thread codes.

Thread ends
Male or female thread on either end, mixed as the order specifies.
Size range
Thirteen stock ODs from Φ6 to Φ100.
Alloys
Hose body in 304 or 316 stainless steel.
Custom builds
Non-standard sizes are made to order when the RFQ asks for them.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
Hose ODΦ6–Φ100
EndsMale/female thread
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Bare corrugated body, or braided?

This SKU lists the bare corrugated stainless body. Where the run needs external pressure resistance or protection from abrasion, ask for the braided version in the same RFQ and state the OD and thread codes.

How long should the hose be for an offset?

Length is set by the offset: the more exposed corrugation, the gentler the bend and the lower the strain at the threads. Give the offset and the port spacing and the factory cuts the exposed length to suit.

Which movements does it absorb?

All three: axial compression and extension along the bore, lateral offset, and angular deflection at the threaded ends. Say which mode dominates the run, because the cut length and end alignment are set for it.

Do I need anchors and guides?

Yes, on any run that moves. Anchor one end and guide the hose so the deflection goes into the corrugation instead of pulling the threaded joints; the guide sits between the ends, not at them.

Will the threads match my ports?

Threads are cut to the codes you name, one per end, so the two need not match. Give both codes and confirm male or female at each port; a female inlet with a male outlet is normal for this SKU.

What tells me the hose needs replacing?

A hard kink against a ferrule, a flattened or stretched corrugation, or a thread that no longer runs up cleanly. Inspect at the collars, since that is where over-bending shows first.

Related products