Skip to content

Need stainless steel fittings, valves or hose?

SS Flanged Expansion Joint — FerruleX stainless steel fittings

SS Flanged Expansion Joint

SS Flanged Expansion Joint: corrugated stainless compensator, SS304/SS316, OD Φ6–Φ100. FerruleX factory RFQ — stocked fast. Stocked sizes ship fast.

Brand
FerruleX
Material
SS304 / SS316
Size range
OD Φ6–Φ100
Type
Flanged expansion joint
Lead time
Stocked + custom RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Corrugated compensator with a bolted flange at each end, sized to drop into a run that already ends in flange joints. The body is stainless corrugated tube in 304 or 316. The factory list runs Φ6, Φ8, Φ10, Φ13, Φ16, Φ20, Φ25, Φ32, Φ38, Φ51, Φ64, Φ75 and Φ100, and non-standard builds are accepted. Applications named for this pattern: building and power piping, heat-supply mains, petrochemical, smelting, aerospace and machinery, plus automation instrument signal tubing, instrument wire protection, precision optical scale and industrial sensor wiring, electronic equipment runs and electrical circuit protection. Put the size, material and flange specification on the RFQ; anything outside the list goes to drawing.

Two flanges, no threads: the corrugated body bolts straight onto the line flanges already in place. Give the medium, the size and the flange pattern when ordering; 304 and 316 bodies are both production material, and off-catalogue sizes run to drawing. Confirm the installed face-to-face length before the build is released.

Range
Φ6 through Φ100 across the catalogue steps.
Material
304 and 316 stainless, both built here.
Ends
Bolted flange connection at both ends of the corrugated body.
Build
Non-standard sizes made to order beyond the catalogue list.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
Size rangeOD Φ6–Φ100
TypeFlanged expansion joint
Lead timeStocked + custom RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Is a braided body offered, or is the corrugated element bare?

This joint is supplied with a bare corrugated element. Braiding belongs to the flexible hose range, where it carries pressure and guards against abrasion; a compensator absorbs movement as a bare bellows with flanges at both ends.

Which movement does the flanged compensator absorb?

The corrugated body takes axial compression and extension, lateral offset and angular deflection. State the movement type and the amount you expect, because the convolution count and the installed length are set from it.

How is the face-to-face length fixed for an offset?

Measure the gap the spool has to bridge with the line cold, then allow the movement the run will impose. The build follows the installed face-to-face length confirmed on the order, not the catalogue size alone.

Does the run need anchors and guides around the joint?

The bellows moves only if the pipe does not, so anchor each side of the joint and guide the run so it stays in one plane. Without them the movement goes into the pipework and the convolutions work unevenly.

How is pressure handled at operating temperature?

Allowable pressure falls as temperature rises, so the rating is not a single figure. Give the design pressure and the working temperature together on the RFQ, and the wall thickness and convolution profile are set against that pair.

What should an inspector look for on the bellows?

Look for permanent deformation between convolutions, staining or cracking at the crown, and fretting at the flange weld. Any of these means the element has been over-deflected and should be replaced rather than returned to service.

Related products