Skip to content

Need stainless steel fittings, valves or hose?

SS Quick-Coupling Corrugated Hose — FerruleX stainless steel fittings

SS Quick-Coupling Corrugated Hose

SS Quick-Coupling Corrugated Hose: corrugated stainless steel hose with quick-coupling ends, SS304/SS316. FerruleX RFQ. Stocked sizes ship fast. Export only.

Brand
FerruleX
Material
SS304 / SS316
Hose OD
Φ6–Φ100
Ends
Quick-coupling
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Quick-coupling ends turn a corrugated stainless hose into a line that uncouples by hand and reconnects without a wrench, which suits instrument drops and sensor runs pulled for service. The core is 304 or 316 stainless, corrugated from Φ6 up to Φ100, with quick-coupling ends to the series named on the order. The same hose doubles as protection conduit for electrical circuits, precision optical scale wiring and industrial sensors, and is used in building, heating, power, petrochemical, smelting and aerospace plant. Non-standard builds go to drawing: state grade, diameter, length, coupler series and the media. Give the coupling series alongside the hose bore; the two are specified separately.

Where a line has to come apart for cleaning, calibration or a swap, the coupling does the work and the corrugated wall takes up the offset between the two fixed points. Both grades are supplied, 304 and 316 stainless, from Φ6 to Φ100; non-standard lengths and end combinations are built to drawing.

Coupling
Quick-coupling ends let the line connect and disconnect by hand.
Grade
Hose core in 304 or 316 stainless, both listed.
Diameter
Φ6 to Φ100, with the intermediate sizes listed.
Duty
Instrument tubing, electrical circuit protection and sensor wiring runs.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
Hose ODΦ6–Φ100
EndsQuick-coupling
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which coupling series should be ordered with a given bore?

The coupling series is specified separately from the hose bore, so state both on the order. Name the series the plant already uses, together with the bore, grade and media.

How is the length set for an offset between two fixed points?

The corrugated wall takes up the offset, so the assembly is ordered at the installed length between the two coupling faces. Give that length and the offset to be absorbed on the RFQ.

Does the hose accept axial, lateral and angular movement?

A corrugated core flexes in all three, which is why it can bridge two fixed points without a separate expansion joint. Movement amplitude still has to be stated, since it sets the installed length.

How do I avoid kinking close to the ferrules?

Kinking starts at the corrugation next to the ferrule, where the wall is restrained. Route the run so the first bend sits clear of the coupling and support the line either side of it.

How does temperature affect the pressure the line can take?

Working pressure falls as service temperature rises, so the two are read together. State the media, the pressure and the temperature on the RFQ and the build is confirmed against that duty.

What should be checked on inspection?

Look for flattened or stretched corrugations, especially beside the couplings, and for seepage at the ferrule joint. A line that has lost its corrugation profile no longer absorbs the offset it was ordered for.

Related products