Skip to content

Need stainless steel fittings, valves or hose?

SS Flanged Corrugated Hose — FerruleX stainless steel fittings

SS Flanged Corrugated Hose — Types, Sizes & Specs

SS Flanged Corrugated Hose: corrugated stainless steel hose with flanged ends, SS304/SS316, Φ6–Φ100. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.

Brand
FerruleX
Material
SS304 / SS316
Hose OD
Φ6–Φ100
Ends
Flange
Customization
Length and flange facing on RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Take a flanged corrugated hose where a flexible run has to break at a bolted joint rather than a thread. FerruleX forms the bellows in SS304 or SS316 and welds flange ends to the requested bore, covering the catalogue spread: Φ6, Φ8, Φ10, Φ13, Φ16, Φ20, Φ25, Φ32, Φ38, Φ51, Φ64, Φ75 and Φ100. Listed sizes ship from stock; a flange pattern off the standard blank is machined to order. The manual puts these assemblies on building and power piping, heating mains, petrochemical and smelting plant, aerospace work, and instrument lines where the corrugation doubles as protection for sensor and optical-scale cable. Send flange drawing, hose OD, overall length and medium with the enquiry; bore, facing and bolt circle are checked against that drawing before the bellows is welded off.

A bolted flange is also a service point: two fitters and a gasket, no thread sealant to remake. Give the mating flange drawing, because the blank, bolt circle and facing are cut to it, not to a generic pattern. Mixed bore on the two ends is possible when the spool has to step up.

Body
Corrugated SS304 or SS316 bellows, welded to the flange collar.
Flange ends
Bolt pattern, facing and bore cut to the customer drawing.
Sizes
Φ6 through Φ100, including Φ13, Φ16, Φ20, Φ25 and Φ32.
Build
Listed sizes from stock, anything else as a non-standard order.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
Hose ODΦ6–Φ100
EndsFlange
CustomizationLength and flange facing on RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Does the hose need a braid?

A bare bellows carries the medium and absorbs the movement on its own. A braid is added where line pressure would straighten the corrugation, or where torsion has to be resisted. State the duty on the enquiry.

Must the mating flange match a standard pattern?

No. Both ends are cut to the drawing you supply, so bolt circle, bolt count and facing follow your mating flange rather than a catalogue pattern. Send the drawing for both ends.

How is length set for an offset?

Work back from the offset and from the room the bellows needs to bend. The spool is cut so the corrugation flexes over its full length rather than at one convolution. Give centre-to-centre and the offset.

Which movements can one hose absorb?

Axial compression and extension, lateral offset and angular deflection at the flange faces. Combined movement is shared between those directions, so each one gets less than its own limit. State the expected movement in every direction.

Does the pressure rating fall with temperature?

Yes. The bellows wall loses strength as the medium gets hotter, so the working pressure is set from that temperature and the bellows design, not from a room-temperature figure. Give both on the enquiry.

What shows a hose is near the end of its life?

Check the corrugation beside the flange weld: a bright polished band, flattened convolutions or a bulge means the run is over-deflected or torsion is being fed in. Replace it before the wall cracks.

Related products