Skip to content

Need stainless steel fittings, valves or hose?

Hex-Body Compression Ball Valve — FerruleX stainless steel fittings

Hex-Body Compression Ball Valve — Types & Sizes

Hex-body stainless ball valve with compression ends, 1000 psi, standard or long lever. Wrench flats for dense rows. FerruleX factory RFQ.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Body
Hex, wrench flats
Lever
Standard or long lever
Pressure
1000 psi / ambient

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A hex body is an access decision, not a pressure class. In a row of valves bolted to a manifold or a dense cabinet panel, the flats give a wrench somewhere to sit where a round body leaves nothing to grip — and the body is narrower across the corners than a round valve of the same bore. The lever length is the second decision on the same body: a standard lever where the panel is open, a long lever where the valve sits high on a skid or the operator wears gloves and needs visible handle position. Both come from this group at 1000 psi, ambient temperature, with 3–25 mm and 1/8"–1" tube in 304, 316 or 316L, and compression, weld or thread ends. Check the swing arc of a long lever against neighbouring instruments before the port positions are fixed.

Hex-body isolation valve with compression ends: wrench flats for dense rows, 1000 psi at ambient, 3–25 mm and 1/8–1 in tube in 304, 316 or 316L. The same body takes a standard or a long lever — pick the lever for access and gloved hands, then check its swing arc against the panel layout.

Body
Hex flats give a wrench room in a row of valves.
Lever
Standard or long lever on the same body and class.
Class
1000 psi at ambient temperature.
Ends
Compression, weld or thread, 3–25 mm and 1/8"–1".

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
BodyHex, wrench flats
LeverStandard or long lever
Tube OD3–25 mm / 1/8"–1"
Pressure1000 psi
TemperatureAmbient service

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

What temperature can this valve serve?

Ambient service only. The group is not offered for hot lines, so where the process runs above room temperature this body is the wrong choice, whatever the pressure rating says.

Can I throttle flow with it?

No. It is an isolation valve: the ball is designed to sit fully open or fully closed, and part-open service puts the flow across the seat edge where it erodes and chatters.

Does the lever direction have to be set before installation?

Yes. Once the ferrules are made up the body cannot be rotated on the tube, so fix the lever quadrant against the panel or neighbouring valves before the nuts are finally tightened.

Will the threaded ends fit my existing ports?

Only if the thread form matches. State the port form with the order; a thread end cut to one form will not seal against the other, and adapters add a joint to a valve meant to be a single barrier.

Does the valve need a mounting bracket?

No separate bracket is supplied. The body is carried by the tube run, or by the manifold it is bolted to, and the hex flats are there for the wrench during make-up rather than for a clamp.

What happens to the fluid trapped when I close it?

The body has no vent port, so fluid stays trapped between the ball and the downstream seat. Isolate and bleed upstream before breaking the joint, and do not rely on the valve alone to empty the line.

Related products