
Stainless Steel Investment Cast Ball Valve — Sizes
Investment cast ball valve, 250 psi, DN6–DN100 (1/8"–4"), threaded or reducing ends, 304/316/316L. Utility shutoff at larger sizes. FerruleX RFQ.
- Brand
- FerruleX
- Material
- SS304 / SS316 / SS316L
- Size
- DN6–DN100 (1/8"–4")
- Ends
- Threaded or reducing
- Pressure
- 250 psi
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
This is a different family from the instrument ball valves, and it is worth saying so plainly. The body is cast, the ends are threaded or reducing, the sizes run from DN6 to DN100 (1/8"–4"), and the class is 250 psi — an order of magnitude below the 930 psi instrument group and two below the 4600 psi manifolds. That is not a weakness in its own duty: at 2, 3 and 4 inch, a cast threaded body is what keeps the price and the weight sensible for plant water, air headers, drains and tank outlets. What it must not do is end up on a panel line at 930 psi because it was the cheap valve of the right size. Choose it by duty first: low-pressure utility, where bore matters more than class, in 304, 316 or 316L, straight, angle or reducing.
Utility shutoff at larger sizes: cast threaded body, DN6–DN100 (1/8–4 in), 250 psi, 304, 316 or 316L, straight, angle or reducing. This is the low-pressure utility family — not a substitute for the 930 psi instrument valves on a panel line.
- Duty
- Low-pressure utility: water, air headers, drains, tank outlets.
- Range
- DN6–DN100 (1/8"–4"), the broad end of the catalogue.
- Class
- 250 psi — different family from the 930 psi instrument valves.
- Ends
- Threaded (ZG(R), NPT, G) or reducing.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 / SS316L |
| Size | DN6–DN100 (1/8"–4") |
| Ends | Threaded (ZG(R) / NPT / G) or reducing |
| Patterns | Straight, angle, reducing |
| Pressure | 250 psi |
| Duty | Low-pressure utility shutoff |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Should I order the straight or the angle body?
They share the same body and class. The angle pattern replaces an elbow at a corner of the run, so it saves a joint; the straight pattern suits an inline drop. Order by the pipe route, not by pressure.
What class is this body, and where does it stop?
It is a 250 psi casting, threaded. The instrument valves are 930 psi bar-stock bodies and the manifolds run to 4600 psi. Those classes are not interchangeable, so never fit this body to a panel line.
Can I throttle flow with it?
No. A ball seat is for shutoff, not regulation. Cracking it part open puts the flow across the seat edge and wears it, so set flow with a valve made for that and keep this one fully open or closed.
Can it be panel mounted?
The body can be bracketed, but the class is what rules it out of panel work. Panel and instrument lines run at pressures this cast body is not rated for; take a bar-stock instrument valve for a panel.
Which thread form do I specify?
We cut ZG(R), NPT or G to order. State the form and the size on the order, because mismatched threads engage only partially and then leak under pressure rather than seal.
Which way should the handle face after make-up?
Set the handle position before the last tightening, since thread make-up turns the body with it. Tighten to the seal, not to a chosen angle, then check that the handle clears the pipe and still turns fully.
Related products

Valve Manifold
Stainless valve manifold for instrument isolation and distribution. FerruleX factory RFQ. Confirm ports and pressure class.
View details →
2-Valve Manifold
2-Valve Manifold: isolate and vent for static pressure gauges and transmitters. SS304/316 stainless. FerruleX factory RFQ — confirm ports and pressure class.
View details →
3-Valve Manifold
3-Valve Manifold: block and equalize for differential pressure transmitters. SS304/316 stainless. FerruleX factory RFQ — confirm ports and pressure class.
View details →
5-Valve Manifold
5-Valve Manifold: adds drain and vent for transmitter calibration work. SS304/316 stainless. FerruleX factory RFQ — confirm ports and pressure class.
View details →