
Valve Manifold
Stainless valve manifold for instrument isolation and distribution. FerruleX factory RFQ. Confirm ports and pressure class.
- Brand
- FerruleX
- Material
- SS304 / SS316 / SS316L
- Ports
- 1/8"–1" / M10–M24
- Ends
- Ferrule, weld, thread or reducing
- Pressure
- 4600 psi / 32 MPa
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
A valve manifold puts the valves an instrument needs into one body instead of a stack of nipples, tees and separate valves between the process and the transmitter. Every joint that disappears is a joint that cannot leak, and hook-up becomes one part to mount rather than five to assemble in the field. The body carries isolation, equalizing and venting passages internally; the count you order follows the instrument, not the other way round: isolation plus a vent for a gauge or absolute transmitter, two blocks and an equalizer for a differential transmitter, and independent vents on both sides when calibration work is frequent. This group is 4600 psi (32 MPa) at ambient, with 1/8"–1" and M10–M24 ports, ferrule or threaded ends, in 304, 316 or 316L.
Instrument manifold in 304, 316 or 316L stainless: one body carrying the isolation, equalizing and venting valves an instrument needs. 4600 psi (32 MPa) at ambient, ports 1/8–1 in and M10–M24 in ferrule, weld, thread or reducing ends. Choose the valve count from the instrument — 2, 3 or 5 — and state it with the port diagram on the RFQ.
- Joint count
- Replaces a stack of valves, nipples and tees with one body.
- Valve count
- 2, 3 or 5 valves, chosen by the instrument rather than by habit.
- Class
- 4600 psi (32 MPa) at ambient, ports 1/8"–1" and M10–M24.
- Materials
- 304, 316 or 316L stainless, ferrule or threaded ends.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 / SS316L |
| Ports | 1/8"–1", M10–M24 |
| Ends | Ferrule, weld, thread, reducing |
| Configuration | 2, 3 or 5 valves on the RFQ |
| Pressure | 4600 psi / 32 MPa |
| Temperature | Ambient service |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Can every port on the body be shut off?
Not individually. The 2, 3 and 5 valve bodies isolate the instrument, equalize the two sides and vent to atmosphere; the process ports themselves are not separate isolation points. Say which port you need closed.
How do I decide between the 2, 3 and 5 valve bodies?
From the instrument. Isolation plus a vent suits a gauge or absolute transmitter, two blocks and an equalizer suit a differential transmitter, and the 5 valve body adds independent venting on both sides.
Which pressure class is this manifold rated for?
The group is quoted at 4600 psi (32 MPa) at ambient, with 1/8"–1" and M10–M24 ports. A lower utility class is a separate enquiry, not a variant of this body.
What temperature can the manifold run at?
It is quoted for ambient service only. Anything hotter has to be stated with the medium and the working temperature on the RFQ, so the rating is confirmed for that duty before the order is released.
How do I vent the isolated side?
Through the vent valve in the body, which opens the instrument side to atmosphere while the block valve holds the process off. Order the vent on the side you bleed, and on both sides if calibration is frequent.
Which thread form should I specify for threaded ends?
State the thread form on the RFQ. NPT and BSPT look close and do not seal to each other, so a manifold cut to the wrong one will not make up cleanly against the plant connection.
Related products

2-Valve Manifold
2-Valve Manifold: isolate and vent for static pressure gauges and transmitters. SS304/316 stainless. FerruleX factory RFQ — confirm ports and pressure class.
View details →
3-Valve Manifold
3-Valve Manifold: block and equalize for differential pressure transmitters. SS304/316 stainless. FerruleX factory RFQ — confirm ports and pressure class.
View details →
5-Valve Manifold
5-Valve Manifold: adds drain and vent for transmitter calibration work. SS304/316 stainless. FerruleX factory RFQ — confirm ports and pressure class.
View details →
Straight Compression Ball Valve — Types & Sizes
Straight Compression Ball Valve: stainless steel ball valve, double-ferrule ends, 930 psi. SS304/316. FerruleX RFQ. Stocked sizes ship fast.
View details →