
High-Pressure Compression Ball Valve
High-Pressure Compression Ball Valve: HP stainless steel ball valve with double ferrules. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
- Brand
- FerruleX
- Material
- SS316 / SS316L
- Ends
- Compression (double ferrule)
- Pattern
- Straight, angle or three-way
- Pressure
- 3000 psi valve class
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
Three thousand psi is a class, not a sentence. This is the compression-end ball valve for lines that run above the 930 psi utility group: same quarter-turn isolation, ferruled ends, 316 or 316L body, straight, angle and three-way patterns, panel mounting available. What changes at this class is where the limit sits. The valve is rated 3000 psi; the line's usable pressure is set by the weakest member of the assembly — the valve, the ferrule joint, or the tube wall at that diameter and temperature. So the RFQ has to carry the tube OD and wall, not just the valve size, and the tube has to be fully annealed below HRB 90 / HV 190 to ASTM A269 or GB/T 14976. Ask for the rating of the exact combination rather than for the valve alone.
Compression-end isolation valve for lines above the 930 psi utility group: 3000 psi valve class, 316 or 316L body, straight, angle and three-way, panel mounting available. The valve rating is not the line rating — valve, ferrule joint and tube wall together decide what the assembly holds.
- Class
- 3000 psi valve rating, well above the 930 psi utility group.
- Assembly
- The line holds what the weakest member holds, not the valve alone.
- Tube
- Fully annealed, below HRB 90 / HV 190, per A269 or GB/T 14976.
- Patterns
- Straight, angle and three-way; panel mounting available.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS316 / SS316L |
| Ends | Compression, double ferrule |
| Patterns | Straight, angle, three-way |
| Pressure | 3000 psi valve class |
| Tube | Annealed, below HRB 90 / HV 190, A269 or GB/T 14976 |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Why does this valve read 3000 psi when the utility ball valves read 930 psi?
The 3000 psi figure is the valve class for high-pressure compression lines. The 930 psi utility group is the lower tier, so the two are not interchangeable, and the assembly still holds only what its weakest member holds.
Why does the RFQ need the tube OD and wall, not just the valve size?
Because the valve is only one member of the assembly. The ferrule joint and the tube wall at your diameter decide what the line holds, so both have to be stated on the enquiry.
Straight or angle body — how do I choose?
Take straight where the run is already in line and there is room for the lever sweep. Take angle where the line turns at the valve, which removes an elbow and keeps the lever clear of the tube.
On the three-way pattern, which ports connect and can all three be shut?
State L-port or T-port on the RFQ, because the port layout sets which ways connect. All three cannot be shut at once on a three-way ball valve; one port always remains open to another.
Can I throttle flow with it?
No. This is an isolation valve, so run it fully open or fully closed. Throttling on a part-open ball seat erodes the seat edge and gives poor control, so fit a needle valve where regulation is needed.
Is panel mounting available?
Yes, it is offered on this series. The panel cut-out and fixing details come with the quote, since they depend on the valve size and pattern you order.
Related products

Hex-Body Compression Ball Valve — Types & Sizes
Hex-body stainless ball valve with compression ends, 1000 psi, standard or long lever. Wrench flats for dense rows. FerruleX factory RFQ.
View details →
Stainless Steel Investment Cast Ball Valve — Sizes
Investment cast ball valve, 250 psi, DN6–DN100 (1/8"–4"), threaded or reducing ends, 304/316/316L. Utility shutoff at larger sizes. FerruleX RFQ.
View details →
Valve Manifold
Stainless valve manifold for instrument isolation and distribution. FerruleX factory RFQ. Confirm ports and pressure class.
View details →
2-Valve Manifold
2-Valve Manifold: isolate and vent for static pressure gauges and transmitters. SS304/316 stainless. FerruleX factory RFQ — confirm ports and pressure class.
View details →