Skip to content

Need stainless steel fittings, valves or hose?

High-Pressure Female Ball Valve — FerruleX stainless steel fittings

High-Pressure Female Ball Valve

High-Pressure Female Ball Valve: HP stainless steel ball valve, female thread. SS316 preferred. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Ends
Female thread 1/8"–1" / M10–M24
Pattern
Straight or angle
Pressure
4600 psi / 32 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Stepping from the 930 psi group to 4600 psi (32 MPa) changes the valve, not just the number. This is the female thread-end pattern: threads run 1/8"–1" and M10–M24, and the thread standard has to be stated on the RFQ. The group also lists compression, weld and reducing ends, and it stops at two body patterns: straight and angle, with no three-way. Materials are 304, 316 or 316L. Service is ambient only, and that does not change with the pressure rating — a high-pressure body does not buy temperature headroom. Confirm the duty temperature before selecting the class, then confirm the thread form, because pressure class and thread standard are separate decisions here.

4600 psi (32 MPa) stainless ball valve with female thread ends for high-pressure instrument and utility branches. Threads 1/8–1 in and M10–M24. Straight and angle bodies only; no three-way in this group. Ambient temperature service, materials 304, 316 or 316L. Confirm the thread standard on the RFQ.

Duty
4600 psi (32 MPa) working pressure, ambient temperature only.
Threads
Female threads in 1/8"–1" and M10–M24; state the standard.
Options
Compression, weld and reducing ends are also listed in this group.
Patterns
Straight and angle bodies only; no three-way in this group.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
EndsFemale thread 1/8"–1", M10–M24
PatternStraight or angle (no three-way)
Pressure4600 psi / 32 MPa
TemperatureAmbient service only

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

How does the 4600 psi class differ from the 930 psi group?

The body is built for 4600 psi (32 MPa) instead of 930 psi, so the two are not interchangeable on a high-pressure branch. Thread endings and body patterns are otherwise the same.

Does the higher pressure class raise the temperature limit?

No. This valve is ambient service only, and the pressure class changes the body rather than the temperature ceiling. Confirm the duty temperature before selecting the class.

Should I choose a straight or an angle body?

Straight bodies suit an in-line run; angle bodies turn the line through ninety degrees and save an elbow at the corner. Both patterns are held in this group at the same pressure class.

Is a three-way or multi-port version available?

No. This group stops at straight and angle two-port bodies, so there is no L-port or T-port selection here. A three-way duty needs a different valve family.

Can I order NPT threads, and what happens if the mating part is BSPT?

Female threads run 1/8 in to 1 in and M10 to M24, and the standard must be stated on the RFQ. NPT and BSPT do not seal against each other, so specify one form for both sides.

Can this valve be used for throttling?

Not as a control valve. A ball seat is made for on and off duty, and holding it part open washes the seat and makes the handle position unreliable. Size a needle or regulating valve instead.

Related products