Skip to content

Need stainless steel fittings, valves or hose?

Mini Ball Valve — FerruleX stainless steel fittings

Mini Ball Valve

Mini Ball Valve: compact stainless steel ball valve for dense OEM panels. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS316 / SS316L / SS304
Ends
Compression / weld / thread
Pattern
Mini, straight
Pressure
930 psi / 6.4 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Do not read the rating from the body size. The mini ball valve carries the same 930 psi (6.4 MPa) rating as the rest of this group; the small body is a packaging choice, not a derating. It fits where a standard body blocks neighbouring instruments or will not close inside a cabinet door. The working ceiling is the same as well: ambient service, around 70 °C. Specify a mini when the panel position is tight and the duty is branch isolation. End connections follow the group range, with compression, weld and thread styles across sizes 3–25 mm and 1/8"–1"; bodies in 316, 316L or 304 stainless.

Compact-body 930 psi (6.4 MPa) stainless ball valve for positions where a standard body will not fit. The rating matches the rest of the group, so the mini is a space decision, not a pressure decision. Ambient service with a working ceiling around 70 °C. Sizes 3–25 mm and 1/8–1 in, compression, weld or thread ends, in 316, 316L or 304.

Envelope
Compact body for tight panel positions and shallow cabinets.
Rating
Same 930 psi (6.4 MPa) as the group; the small body is not a derating.
Choice
Specifying a mini is a space decision, not a pressure decision.
Ceiling
Ambient service, working ceiling around 70 °C.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS316 / SS316L / SS304
EndsCompression, weld or thread
Tube OD3–25 mm / 1/8"–1"
PatternMini, straight
Pressure930 psi / 6.4 MPa at ambient
TemperatureAmbient; working ceiling around 70 °C

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Is the mini available with an angle body?

No. This is the straight pattern only, with the ports in line through the body. Where the run turns at the valve, select an angle pattern from the wider ball valve range instead.

Is the mini rated below the larger ball valves?

No. It carries the same 930 psi (6.4 MPa) at ambient as the rest of the group. The compact body is a packaging decision for tight panels, not a derating.

What does the 70 °C working ceiling rule out?

Steam, hot oil and any line that runs above that ceiling. The valve is built for ambient service, so keep the fluid temperature below the stated figure and do not rely on intermittent excursions.

Can the mini be used to throttle flow?

No. A ball seat is an on-off device; part-open service puts the seat and ball edge under continuous erosion and the setting will drift. Use it fully open or fully closed.

Can I order NPT and BSPT ends on the same valve?

Yes, the two forms can be specified per end, but they do not interchange. Taper threads of different families will not seal against each other, so match each port to the mating part at order.

Does the mini mount directly to a panel?

There is no separate panel bush. It is an inline body carried by its end connections, so the panel position is set by the tubing run and the body needs support on both sides.

Related products