Skip to content

Need stainless steel fittings, valves or hose?

Weld-End Ball Valve — FerruleX stainless steel fittings

Stainless Steel Weld-End Ball Valve — Types & Sizes

Weld-End Ball Valve: stainless steel ball valve with weld prep for permanent lines. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS316 / SS316L / SS304
Ends
Weld
Pattern
Straight, angle or three-way
Pressure
930 psi / 6.4 MPa

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A weld-end valve is chosen when the joint has to be permanent — a buried run, a skid that leaves the shop welded, a line where a compression joint is not trusted. The trade is exact: no joint to work loose and no elastomer in the seal path, but the valve now comes out only by cutting the line. That decides two things before the RFQ. First, put a union or a flanged break next to any welded valve that may need service. Second, protect the seat while welding: the body is stainless and survives heat, the seat and packing are what suffer, so the weld procedure is part of the valve specification. The body itself is 930 psi (6.4 MPa) at ambient, with a working ceiling around 70 °C, in 316, 316L or 304, straight, angle and three-way bodies.

Permanent-joint isolation valve for skids, buried runs and lines that leave the shop welded. 930 psi (6.4 MPa) at ambient, ceiling around 70 °C, in 316, 316L or 304. Put a serviceable break next to it, and specify the weld procedure — the seat is the part at risk, not the body.

When
Permanent joints: skid builds, buried runs, no-elastomer lines.
Trade
No joint to loosen, but service means cutting the line.
Weld care
The seat and packing take the heat, so the procedure is specified.
Class
930 psi (6.4 MPa) at ambient, ceiling around 70 °C.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS316 / SS316L / SS304
EndsWeld
PatternsStraight, angle, three-way
Pressure930 psi / 6.4 MPa at ambient
TemperatureAmbient; working ceiling around 70 °C

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Straight body or angle body?

Straight where the run passes through and the pipe does not turn; angle where the line turns at the valve and an elbow drops out. The weld prep is identical, so pipe layout decides.

Does L-port or T-port matter on a three-way body?

Yes. An L-port joins two adjacent ports and leaves the third shut; a T-port has a common port with the other two selectable. The two are not interchangeable, so name the arrangement in the RFQ.

Can a three-way valve shut all three ports?

No. The ball always leaves at least one path open through the bore, so a genuine dead end across all three ports needs a second valve in the line.

Utility class or high pressure?

This is the utility class: 930 psi (6.4 MPa) at ambient. A line running above that is a different body class, not a matter of changing the weld ends.

What does the 70 °C ceiling rule out?

Steam and hot process work. Above that ceiling the seat and packing sit outside their working range, so the valve belongs to water, air and ambient-temperature lines.

Can I throttle with it?

No. A ball valve isolates, it does not throttle. Held part open the seat erodes and the ball can chatter, so run it fully open or fully closed.

Related products