Skip to content

Need stainless steel fittings, valves or hose?

Compression / Quick-Screw Straight & Bulkhead Connectors — FerruleX stainless steel fittings

Compression / Quick-Screw Straight & Bulkhead Connectors

Compression / Quick-Screw Straight & Bulkhead: hybrid stainless fittings for mixed tube styles. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.

Brand
FerruleX
Material
SS316 / SS316L / SS304
Compression OD
3–5 mm / 1/8"–1/2"
Quick-screw OD
4–6 mm / 1/8"–1/2"
Pressure
1000 psi standard / 4500 psi high-pressure

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

A plant line often reaches a panel one way and leaves another: hard seamless tube on the instrument side, soft pneumatic hose on the cabinet side. This body carries both ends without an adapter, pairing a compression port, where the ferrule bites into the tube wall, with a quick-screw nut that takes tubing by hand. Straight versions join two lines inline; bulkhead versions pass through the panel wall. Material is SS316, SS316L or SS304. Tube OD covers 4 to 16 mm, or 1/8 to 1/2 inch. Threads run M5 to M24 in ZG(R), NPT, G or M form. Liquid and gas service. Ordering needs both outside diameters and the thread called out separately.

Panel work is the real constraint here: the bulkhead body fixes to the wall, so tube can be made up from one face while the other side stays accessible. State which end is compression and which is quick-screw, plus both outside diameters and the thread.

End pairing
One port is compression with a bite-type ferrule, the other is quick-screw.
Tube range
Outside diameters from 4 to 16 mm, or 1/8 to 1/2 inch.
Threads
M5 to M24 in ZG(R), NPT, G or M form.
Panel mount
Bulkhead bodies pass through a panel wall; straight bodies join two lines.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS316 / SS316L / SS304
Compression OD3–5 mm / 1/8"–1/2"
Quick-screw OD4–6 mm / 1/8"–1/2"
Pressure1000 psi standard / 4500 psi high-pressure

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which tube materials suit each end of this body?

The compression port takes seamless stainless tube in SS316, SS316L or SS304. The quick-screw nut is for softer tubing such as nylon or polyurethane, so state the tube material when ordering.

What pressure rating applies, and does it change with tube size?

Standard bodies are rated to 1000 psi and high-pressure versions to 4500 psi. The rating belongs to the body and thread, so confirm it against the tube you actually fit.

Can the tube end be remade, and can the fitting itself be reused?

The compression end can be cut back and remade, provided enough tube length remains. The quick-screw nut releases by hand and can be retightened many times; discard a ferrule that has been overtightened.

What seal material is used, and what is it compatible with?

Sealing is by the ferrule on the compression side and by an elastomer seal under the quick-screw nut. Confirm the seal compound against your medium before ordering, since aggressive media need a different grade.

How much panel thickness can a bulkhead body take?

The bulkhead body needs enough wall to seat both faces, and the locking nut must land on flat panel. Tell us the panel thickness and the clearance behind it when ordering.

What causes a tube to pull out of the fitting?

Pull-out comes from an under-tightened nut, tube inserted short of the ferrule seat, or a tube OD below the fitting size. Side load and vibration worsen it, so support long runs.

Related products