Stainless Steel Quick-Screw Tube Fittings
8 productsQuick-screw straight, female, union, elbow, tee and bulkhead connectors for air and light fluid lines. Separate from push-to-connect series.
How to order: Quick-screw fittings speed panel work with a nut-and-ferrule bite on soft or hard tube. Confirm OD and thread gender on the RFQ.
Open a card for material, ends and ordering. Price is on the quote.

Compression / Quick-Screw Straight & Bulkhead Connectors
Compression / Quick-Screw Straight & Bulkhead: hybrid stainless fittings for mixed tube styles. FerruleX RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →
Push-In Quick-Screw Fittings — Types & Sizes
Push-In Quick-Screw Fittings: stainless steel tube fittings, OD 4–12 mm / 1/8–1/2 in, pneumatic class 10–16 bar. SS304/316. FerruleX RFQ. Series and pressure class confirmed per order.
View details →
Quick-Screw Straight Connector — Sizes & Specs
Quick-Screw Straight Connector: stainless steel tube fittings, tube to thread, pneumatic class 10–16 bar. FerruleX factory RFQ. Pressure class confirmed per order.
View details →
Stainless Steel Quick-Screw Female Connector — Sizes
Quick-Screw Female Connector: stainless steel tube fittings to female NPT/G ports. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Stainless Steel Quick-Screw Straight Union — Types
Quick-Screw Straight Union: stainless steel tube fittings for equal tube-to-tube joins. FerruleX factory RFQ. Stocked sizes ship fast. Fast stock shipping.
View details →
Quick-Screw Elbow Connector
Quick-Screw Elbow Connector: 90° stainless steel tube fittings for tight cabinets. OD 4–6 mm. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Quick-Screw Tee Connector
Quick-Screw Tee Connector: three-way stainless steel push-to-connect fitting for air circuits, 1000 psi. FerruleX factory RFQ.
View details →
Quick-Screw Bulkhead Connector — Types & Sizes
Quick-Screw Bulkhead Connector: panel-pass stainless steel tube fittings, OD 4–16 mm. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →Choosing in this range
Which tube materials work?
PU or nylon. The grip bites the tube wall, and metal tube defeats it — that is why compression exists for metal.
Can I reuse the tube end after pulling it out?
Once or twice, but repeated pulls score the wall the grip needs. Trim the tube square before re-inserting rather than pushing the same end back in.
Does a bulkhead body need a panel thickness?
Yes. The body clamps through the plate and the nut range has to suit it, so state the plate thickness with the order.
Does the thread need sealant?
The port thread seals the body; the tube seals on the grip and O-ring, so no sealant belongs on the tube side.
Why does the tube pull out under pressure?
Usually the tube was not pushed to the stop, is out of tolerance, or the end is scored. Cut square, push fully, then test.