Skip to content

Need stainless steel fittings, valves or hose?

Push-to-Connect Elbow Fitting — FerruleX stainless steel fittings

Push-to-Connect Elbow Fitting

Push-to-Connect Elbow Fitting: 90° stainless push-in fitting for crowded bases. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.

Brand
FerruleX
Material
SS304 / SS316
Type
Push-to-connect elbow
Pattern
90°
Order mode
Factory RFQ

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Ninety degrees is decided by the base plate, not by the tube. A push-in elbow lets a run leave a valve block and turn towards the cylinder without a coil of slack behind it. Tube ends span 3 mm to 25 mm, or 1/8 to 1 inch. Threaded versions are cut ZG(R), NPT, G or M, with the metric span M10 to M24. Bodies come in SS304, SS316, SS316L or copper, listed for liquid and gas across energy and environmental plant, automotive and shipbuilding, petrochemical, construction, food processing and pharmaceutical work. Working pressure is listed at about 3000 psi, service temperature -10 to 300 C unfrozen. Cut square and push to the shoulder: the collet grips the outside diameter, so a bent or oval end will not hold. Tube OD and thread family go on the RFQ.

Plan the corner before the tube is cut: the elbow occupies two planes, so the exit direction is fixed by the body, not by twisting the tube afterwards. Threads are ZG(R), NPT, G or M, metric M10 to M24, and the body takes 3 mm to 25 mm tube in SS304, SS316, SS316L or copper.

Body
90° stainless body, offered in SS304, SS316, SS316L or copper.
Tube ends
Push-in collet ends take 3 mm to 25 mm tube, or 1/8 to 1 inch.
Threads
ZG(R), NPT, G or M, with M10 to M24 across the metric span.
Duty
Liquid and gas service, listed at about 3000 psi.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316
TypePush-to-connect elbow
Pattern90°
Order modeFactory RFQ

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

How much straight tube must enter the body before the bend can start?

The tube has to reach the shoulder inside the body, with no bend inside the insert length. The collet grips the outside diameter, so the run must turn after the body, not be curved while it is still inside it.

What pressure can the elbow hold on a given tube size?

The body is listed at about 3000 psi across the 3 mm to 25 mm tube span, but the tube wall and its own rating decide the pair. Send both figures on the RFQ so fitting and tube are checked together.

Can a push-in joint be released and remade on site?

Yes. Push the collet collar in towards the body and the tube withdraws, so the joint can be broken and remade. Inspect the tube end each time; a scored or oval end has to be cut back square before it goes in again.

What actually seals the tube, the collet or something else?

An elastomer O-ring captured inside the body seals on the tube outside diameter; the collet only holds it. Keeping the two duties apart explains why a firm grip can still weep on a scored tube surface.

Should thread sealant be used on the threaded branch?

Sealant belongs on the male thread only, in a grade suited to the service. Keep it clear of the bore and off the tube end; it seals the thread joint and plays no part in holding the tube.

Why does a tube pull out of the elbow under load?

Almost always the tube end. An oval or burred cut, a tube pushed short of the shoulder, or a side load levering the body will all release it. The collet grips the outside diameter only, so the end must be round and square.

Related products