Skip to content

Need stainless steel fittings, valves or hose?

Push-to-Connect Throttle Valve — FerruleX stainless steel fittings

Push-to-Connect Throttle Valve — 316L Air Line

Push-to-Connect Throttle Valve: stainless flow control for air lines, 4–12 mm / 1/8–1/2 in tube, to 150 psi (10 bar) class. SS304/316. FerruleX RFQ.

Brand
FerruleX
Material
SS304 / SS316 / SS316L
Ends
Push-to-connect / thread
Tube OD
4–12 mm / 1/8–1/2 in typical
Pressure
To 150 psi (10 bar) typical pneumatic class

Request a factory quote

  • Stock5–7 days after confirmation
  • Make to order15–25 days production
  • Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
  • OEMLogo and drawings accepted · price on RFQ

Description

Restriction and joint sit in one body on this valve: the tube pushes into the collet and the throttling passage follows it, so the trim point and the connection are the same part. Stainless 304, 316 and 316L bodies are listed from 3 mm to 25 mm tube and from 1/8 to 1 inch, 3.175 mm to 25.4 mm on the inch family. Threaded ends come as ZG(R), NPT, G or M, the metric span running M10 to M24. Liquid and gas both pass, from -10 to 300 C with the medium unfrozen. Give tube OD, thread form and medium on the enquiry, and the tube specification is checked against the body before cutting.

One body carries both ends, so nothing has to be added between tube and thread. Start from the tube OD: 3 mm to 25 mm, or 1/8 to 1 inch at 3.175 mm to 25.4 mm. Threads follow as ZG(R), NPT, G or M, M10 to M24. Liquid or gas, unfrozen, -10 to 300 C.

Tube span
OD 3 mm to 25 mm and 1/8 to 1 inch, that is 3.175 mm to 25.4 mm.
Threads
Ends are cut ZG(R), NPT, G or M, with M10 to M24 in the metric series.
Media
Liquid or gas, served from -10 to 300 C with the medium unfrozen.
Material
Bodies in 304, 316 or 316L stainless.

Specifications

SpecificationValue
BrandFerruleX
MaterialSS304 / SS316 / SS316L
EndsPush-to-connect / thread
Tube OD4–12 mm / 1/8–1/2 in typical
PressureTo 150 psi (10 bar) typical pneumatic class

Request Quote

Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.

Request a factory quote

Questions about this part

Which tube materials can be used with the valve?

The body is listed in 304, 316 and 316L stainless, and the tube grade is matched to the body and to the medium. Give the tube specification on the enquiry and it is checked before cutting.

What pressure can the valve take, and does tube size change it?

The listed pneumatic class runs to 150 psi (10 bar), quoted over the typical tube span of 4–12 mm and 1/8–1/2 in. State tube OD and pressure together so both are confirmed.

What temperature range does the valve work over?

Liquid and gas are both handled from -10 to 300 C, with the medium kept unfrozen. The tube specification is checked against the body so the joint suits the same duty.

How does the throttle valve differ from a ball valve?

The throttling passage sits behind the collet and trims flow continuously, while a ball valve is turned open or shut. Restriction and joint stay in one body on this valve.

Is sealant needed on the threaded end?

Threads are cut ZG(R), NPT, G or M and seat on the port, so a thread sealant matched to the medium is applied to the male thread and kept clear of the passage.

What causes a tube to pull out of the collet?

A scored or under-inserted tube is the usual cause. The tube goes in until it seats, and the collet is pressed to release it rather than twisting the body.

Related products