
Push-to-Connect Straight Union — Sizes & Specs
Push-to-Connect Straight Union: stainless push-in tube-to-tube union. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
- Brand
- FerruleX
- Material
- SS304 / SS316
- Type
- Push-to-connect union
- Pattern
- Straight
- Order mode
- Factory RFQ
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
Tube runs break and rejoin at this union without a tool: press each tube in to the shoulder and the push-in end grips and seals it. Bodies come in 304, 316 and 316L stainless, with copper listed as an alternative, over tube OD 3 mm to 25 mm, that is 1/8 inch to 1 inch or 3.175 mm to 25.4 mm. Media are liquid and gas. The catalog figure for the push-in straight family is about 3000 psi, with a working temperature of minus 10 to 300 C on non-freezing service. Thread ends in ZG(R), NPT, G or M are offered from M10 to M24 where one side has to enter a port. State tube OD and alloy on the RFQ.
Keep a spare in stores for each tube size. Both push-in ends release by hand, so a failed hose is cut out and the union refitted without hot work. Tube OD 3 mm to 25 mm and 1/8 to 1 inch, SS304, SS316 or SS316L, copper alternative. Liquid and gas, about 3000 psi, minus 10 to 300 C.
- Tube OD
- 3 mm to 25 mm, 1/8 to 1 inch (3.175 to 25.4 mm), equal on both ends.
- Materials
- SS304, SS316 or SS316L, with copper listed as an alternative.
- Pressure
- The catalog gives about 3000 psi for the push-in straight family.
- Threads
- ZG(R), NPT, G or M ends from M10 to M24 where a port is involved.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 |
| Type | Push-to-connect union |
| Pattern | Straight |
| Order mode | Factory RFQ |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing. Packing, payment and the usual quote questions are on thedelivery pageand the FAQ.
Questions about this part
Which tube materials can this union take?
The collet grips stainless, copper and rigid plastic tube alike; the tube must be round and unscored. State tube material and OD on the RFQ.
Does the pressure rating change with tube size?
About 3000 psi is the catalog figure for the push-in straight family, not a per-size guarantee. Confirm the working pressure for the tube OD you are using when you request the quote.
Can the union be re-tubed and reused?
Yes. The push-in end releases by hand and the union can be re-tubed, provided the collet and seal are inspected before it goes back into service and the tube end is cut square.
What seal material is fitted?
The seal compound is chosen against the medium, so name the fluid and its concentration on the RFQ. A seal matched to the wrong fluid is the usual cause of a leak rather than a pull-out.
Why does a tube pull out of the collet?
Tube pull-out comes from an end cut on the skew, a score or burr under the collet, or tube pushed short of the shoulder. Cut square, deburr, and press home until the tube stops.
Will it hold on a vibrating line with side load?
The union is for a supported run, not a cantilever. Clamp the tube close to each end so side load and vibration are taken by the clamp rather than the collet; unsupported tube works the grip loose.
Related products

Push-to-Connect Bulkhead Fitting — Types & Sizes
Push-to-Connect Bulkhead Fitting: panel-pass stainless push-in fitting. SS304/316. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Push-to-Connect Throttle Valve — 316L Air Line
Push-to-Connect Throttle Valve: stainless flow control for air lines, 4–12 mm / 1/8–1/2 in tube, to 150 psi (10 bar) class. SS304/316. FerruleX RFQ.
View details →
Push-to-Connect Straight Fitting
Push-to-Connect Straight Fitting: stainless push-in tube fitting for air/water. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Push-to-Connect Elbow Fitting
Push-to-Connect Elbow Fitting: 90° stainless push-in fitting for crowded bases. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →